THOMSON SpeedTouch 605 User Manual
  1. Manuals
  2. Brands
  3. THOMSON Manuals
  4. Network Router
  5. SpeedTouch 605
  6. User manual

THOMSON SpeedTouch 605 User Manual

(wireless) business dsl routers
Hide thumbs Also See for SpeedTouch 605:
Table of Contents

Advertisement

Quick Links

SpeedTouch™
605/608/608 WL/620
(Wireless) Business DSL Routers
User's Guide
Release R5.3.1
SpeedTouch™608WL and
SpeedTouch™620 only

Advertisement

Table of Contents
loading

Related Manuals for THOMSON SpeedTouch 605

Summary of Contents for THOMSON SpeedTouch 605

  • Page 1 SpeedTouch™ 605/608/608 WL/620 (Wireless) Business DSL Routers User’s Guide Release R5.3.1 SpeedTouch™608WL and SpeedTouch™620 only...
  • Page 3 SpeedTouch™ 605/608 608 WL/620 User’s Guide R5.3.1...
  • Page 4 Copyright Copyright ©1999-2005 THOMSON. All rights reserved. Passing on, and copying of this document, use and communication of its contents is not permitted without written authorization from THOMSON. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by THOMSON.

  • Page 5: Table Of Contents

    Contents About this User’s Guide ... 1 1 Your SpeedTouch™ ... 3 SpeedTouch™ Features ... 4 1.1.1 Hardware Specifications ... 5 1.1.2 Software Features ... 6 SpeedTouch™ LED Behaviour ... 9 How to Access your SpeedTouch™... 11 1.3.1 Access via the Web Interface... 12 1.3.2 Access via CLI ...
  • Page 6 Contents 4 Basic Configuration ... 45 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 4.3.8 4.4.1 4.4.2 4.4.3 4.4.4 MS Windows XP BroadBand Connection ... 39 Mac OS X PPPoE Dial-in Client ... 43 Navigation... 46 Menu ...
  • Page 7 Toolbox ... 67 4.5.1 Remote Assistance ... 68 4.5.2 Game & Application Sharing ... 69 4.5.3 Defined Games & Applications ... 70 4.5.4 Game or Application Definition ... 71 4.5.5 New Game or Application ... 72 4.5.6 Web Site Filtering ... 73 4.5.7 Web Filtering Activation ...
  • Page 8 Contents 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 5.2.10 5.3.1 5.3.2 5.3.3 5.3.4 5.3.5 5.3.6 5.3.7 5.4.1 5.4.2 5.4.3 5.4.4 5.4.5 5.4.6 5.4.7 5.4.8 5.4.9 5.5.1 5.5.2 5.5.3 5.5.4 5.6.1 5.6.2 SpeedTouch™... 104 Easy Setup ... 105 System Information ... 106 Connections ...
  • Page 9 VPN ... 172 5.7.1 LAN to LAN ... 173 5.7.2 VPN Client... 174 5.7.3 VPN Server... 175 5.7.4 Certificates ... 176 5.7.5 Advanced ... 177 5.7.6 Debug ... 178 SIP PBX ... 179 6 Software Keys ... 181 7 Software Upgrade... 183 Embedded Update Page ...
  • Page 10 Contents E-DOC-CTC-20050429-0104 v1.0...

  • Page 11: About This User's Guide

    About this User’s Guide Used Symbols Terminology Generally, the SpeedTouch™605(i), the SpeedTouch™608(i), the SpeedTouch™608(i) WL, and the SpeedTouch™620(i) will be referred to as SpeedTouch™ in this User’s Guide. Typographical In interactive input and output, typed input is displayed in a bold font and...
  • Page 12 About this User’s Guide E-DOC-CTC-20050429-0104 v1.0...

  • Page 13: Your Speedtouch

    Your SpeedTouch™ 1 Your SpeedTouch™ Introduction With the SpeedTouch™605(i) and SpeedTouch™608(i) Business DSL Routers and the SpeedTouch™608 WL(i) and SpeedTouch™620(i) Wireless Business DSL Routers you can build a secure small (home-)office network, seamlessly connecting wired and wireless devices and surf the Internet at high speed, all combined in one device.

  • Page 14: Speedtouch™ Features

    Chapter 1 Your SpeedTouch™ 1.1 SpeedTouch™ Features Introduction Your SpeedTouch™ offers you a wide range of outstanding features. In this section you will find a comprehensive overview of the: Hardware Specifications Software Features E-DOC-CTC-20050429-0104 v1.0...

  • Page 15: Hardware Specifications

    1.1.1 Hardware Specifications Router Integrated multi-mode ADSL modem, supporting: ADSL over POTS for a SpeedTouch™ ADSL/POTS variant) ADSL over ISDN for a SpeedTouch™ ADSL/ISDN variant) ADSL/RE-ADLS2/ADSL2/ADSL2+ for both ADSL over POTS and ADSL over ISDN Physical interfaces WAN: LAN: LEDs LED indicators for all interfaces Reset button One programmable recessed reset button for restoring the factory default settings...

  • Page 16: Software Features

    Chapter 1 Your SpeedTouch™ 1.1.2 Software Features ADSL compliance ATM features Bridging features Routing features If POTS in overlay: G. handshake, Full Rate ADSL, G.dmt, G.lite (splitterless ADSL), ADSL2, RE-ADSL and ADSL2+ If ISDN in overlay: G.handshake, G.dmt, ADSL2, RE-ADSL and ADSL2+ Up to 16 simultaneous PVCs, allowing multiple simultaneous destinations ATM QoS per PVC: CBR, VBR-rt, VBR-nrt, UBR Service monitoring through ITU-T I.620 F4/F5 loopback, alarms (AIS / RDI) and...
  • Page 17 Networking services UPnP with NAT traversal capability: Transparent bridging (IEEE802.1D) PPPoE routing/bridging with integrated PPP Relay PPPoA routing, PPPoA-to-PPTP relaying Hyper-NAT with virtual server mapping (for instance for Web, FTP, Mail servers) and ALGs (such as NetMeeting, MSN Messenger, VPN passthrough, and others) Quality of Service: Managed Ethernet Switch with VLAN, DMZ, mirroring...
  • Page 18 Chapter 1 Your SpeedTouch™ Management and monitoring VoIP Multi-level user protection, Event logging DHCP server, client and relay, DHCP-to-PPP spoofing DNS server, client and relay Time synchronization: SNTPv1, SNTPv2, SNTPv3 and SNTPv4 integrated Real-Time Clock in case of SpeedTouch™608 WL/620 (for non- volatile time-of-day) Syslog SNMPv1 support for:MIB II (RFC1213/2011/2012/2013), traps MIB...

  • Page 19: Speedtouch™ Led Behaviour

    1.2 SpeedTouch™ LED Behaviour Front panel LEDs The SpeedTouch™ is equipped with a number of LEDs on its front panel, indicating the state of the device during normal operation. Following table shows the meaning of the different LEDs: Indicator Name Power Ethernet WLAN...
  • Page 20 Chapter 1 Your SpeedTouch™ Ethernet LEDs Indicator Name Colour State ISDN Green Flashing Green Flashing Internet Green Flashing A LED may be provided per Ethernet port to indicate link integrity (or activity). Depending on the SpeedTouch™ product you are using, a second LED (A) may be provided to indicate the 10/100Base-T selection: Indicator Name...

  • Page 21: How To Access Your Speedtouch

    1.3 How to Access your SpeedTouch™ Access methods Your SpeedTouch™ is accessible in one of following ways: Access Method Command Line Interface (CLI) File Transfer Protocol (FTP) Remote Assistance E-DOC-CTC-20050429-0104 v1.0 Can be used to: Configure your SpeedTouch™ via HTTP or HTTPS.

  • Page 22: Access Via The Web Interface

    Chapter 1 Your SpeedTouch™ 1.3.1 Access via the Web Interface Procedure To access the SpeedTouch™ via the web interface: Open a web browser. In the address bar type your SpeedTouch™’s IP address or DNS host name, by default that is ‘http://speedtouch.lan’ or ‘192.168.1.254’. You can access the pages via the http protocol.

  • Page 23: Access Via Cli

    1.3.2 Access via CLI Command Line You can access the Command Line Interface (CLI) via: Interface (CLI) The embedded Expert pages. For more information, see Configuration” on page A Telnet session This requires that TCP/IP connectivity exists between the host from which the Telnet session is opened and the SpeedTouch™.
  • Page 24 Chapter 1 Your SpeedTouch™ Telnet session Proceed as follows: Open a telnet application. You can use the Command Prompt window. In Windows XP for instance: On the Windows task bar, click Start. Select (All) Programs > Accessories > Command Prompt. Connect to your SpeedTouch™.

  • Page 25: Access Via Ftp

    1.3.3 Access via FTP File Transfer Protocol You can access the file system of the SpeedTouch™ via the File Transfer Protocol (FTP) (FTP), in order to: Restore or backup configuration files, templates or language packs. Upgrade your configuration or firmware. File system The SpeedTouch™...
  • Page 26 Chapter 1 Your SpeedTouch™ File system access rights Common FTP commands On the different directories you have following privileges: Directory root active Depending on the access rights you have on a directory, you can use one of following commands: Command... You can use to...
  • Page 27 FTP file transfer To allow correct file transfers, set the transfer mode to “binary”: At the ftp prompt, type bin and press Enter. Example: /home/doejohn{1}$ftp 192.168.1.254 Connected to 192.168.1.254 220 Inactivity timer = 120 seconds. Use 'site idle <secs>' to change. Name (192.168.1.254:doejohn): 331 SpeedTouch™...

  • Page 28: Remote Assistance

    Chapter 1 Your SpeedTouch™ 1.3.4 Remote Assistance Remote access Enabling remote access Disabling remote access You can make your SpeedTouch accessible from the Internet with regard to remote support. This way, you can allow your helpdesk to access your SpeedTouch™ remotely.

  • Page 29: Local Network Setup

    2 Local Network Setup Introduction The SpeedTouch™ offers you following local networking solutions: Wired Ethernet Wireless Ethernet Device settings Once you’ve connected a device, you are able to personalise its settings: Go to the SpeedTouch™ web pages. In the menu select Home Network > Devices. Click the name of your device, or if the device’s settings haven’t been personalised yet, click the MAC address of the device.

  • Page 30: Wired Ethernet

    Chapter 2 Local Network Setup 2.1 Wired Ethernet Local network Standard wiring procedure Ethernet link check Device settings Managed Ethernet switch The Ethernet ports on the backpanel allow you to connect the SpeedTouch™ to an existing 10 or 100 Base-T Ethernet network or one (or more) computer(s) with installed Ethernet card.

  • Page 31: Wireless Ethernet

    Chapter 2 Local Network Setup 2.2 Wireless Ethernet Introduction The SpeedTouch™ 608 WL/620Wi-Fi® certified IEEE 802.11g compliant wireless access point allows multiple computers to connect wirelessly to your local network over the SpeedTouch™ Wireless LAN environment. The SpeedTouch™ is backward compatible with IEEE 802.11b, which means 802.11b and 802.11g devices can coexist in the same wireless network.

  • Page 32: Wireless Basics

    Chapter 2 Local Network Setup 2.2.1 Wireless Basics Introduction 802.11b/g Wireless Fidelity Access Point Network Name or SSID Radio channels In this section some key wireless concepts are explained. 802.11b is an IEEE standard, operating at 2,4 GHz at a speed of up to 11 Mb/s. 802.11g, a newer IEEE standard also operating at 2,4 GHz, gives you up to 54 Mb/s speed, more security and better performance.
  • Page 33 Chapter 2 Local Network Setup Antennas Direct the external antenna to allow optimization of the wireless link. If for example the antenna is erect, wireless links in the horizontal plane are favoured. Please note that the antenna characteristics are influenced by the environment, that is by reflections of the radio signal against walls or ceilings.

  • Page 34: Connecting First-Time Wireless Clients

    Chapter 2 Local Network Setup 2.2.2 Connecting First-time Wireless Clients Wireless default settings Preparing first-time wireless clients Configuring first-time wireless clients First-time association example After every Reset-to-Defaults, the SpeedTouch™ wireless access point configuration is returned to its initial default settings. These default settings are: Security level is low (security disabled) for an easy first use, meaning the data will not be encrypted.
  • Page 35 To associate your wireless client to the SpeedTouch™: Click the network icon in the notification area: The Wireless Network Connection window appears: In the Choose a wireless network list, select the SpeedTouch™ wireless network and click Connect. Following window appears: Click Connect Anyway.
  • Page 36 Chapter 2 Local Network Setup Wireless device settings Once you’ve connected a device, you are able to personalise its settings. For more information, see “ Device settings” on page To add a wireless device to the Access Control List (ACL), select Allowed on WLAN.

  • Page 37: Wireless Security

    2.2.3 Wireless Security Introduction Since the SpeedTouch™ wireless environment is a radio environment, precautions must be taken to ensure that your wireless network is safe from malicious intruders. To secure your wireless network, following wireless access point settings can be personalised: Your Network Name (SSID) ACL setting...
  • Page 38 Chapter 2 Local Network Setup Data encryption To setup wireless connectivity, you can choose different levels of security: Low (Security disabled, the default): No security; the data will not be encrypted, no authentication process will be used. Medium: Use WEP (Wired-Equivalent Privacy) to encrypt the traffic between the SpeedTouch™...

  • Page 39: Connecting Additional Wireless Clients

    2.2.4 Connecting Additional Wireless Clients Preconditions Make sure that: The SpeedTouch™ is powered on and ready for service. The SpeedTouch™ has been configured as DHCP server (default). The wireless client adapters have been installed on all computers you want to connect to the WLAN.
  • Page 40 Chapter 2 Local Network Setup Registering clients via association button You can easily register new wireless network clients as follows: Push the Association button on the SpeedTouch™ back panel for at least two seconds. The WLAN LED will toggle between green and red. The ACL will be unlocked for a time frame of one minute.

  • Page 41: Extending The Range Of Your Wireless Network

    2.2.5 Extending the Range of Your Wireless Network The SpeedTouch™ features Wireless Distribution System (WDS) functionality. This feature allows you to extend the range of your wireless network by introducing one or more WDS-enabled devices into your wireless network. The Wireless Distribution System (WDS) enables data packets to pass from one wireless access point to another, just as if the access points were ports on a wired Ethernet switch.
  • Page 42 Chapter 2 Local Network Setup Configuring WDS To configure your WDS on the web pages: Go to the SpeedTouch™ web pages. In the menu select Home Network. Click your WLAN. On the top right, click Configure. If not already done, set a settings (WEP encryption or no encryption) on your SpeedTouch™...

  • Page 43: Internet Connectivity Dial-In Clients

    3 Internet Connectivity Dial-In Clients Introduction For setting up initial Internet connectivity, using the Home Install Wizard on the Setup CD or the embedded Easy Setup, refer to the provided Installation and Setup Guide. Access methods Depending on the configuration of the SpeedTouch™ you may have: As soon as the initial configuration has been done, immediate and uninterrupted WAN access is provided.
  • Page 44 Chapter 3 Internet Connectivity Dial-In Clients Embedded PPP dial-in clients Broadband host PPPoE dial-in clients The SpeedTouch™’s embedded PPP dial-in client allows you to establish an Internet connection for computers residing on your local network, using only one computer of the network to control the client.

  • Page 45: Speedtouch™ Web

    3.1 SpeedTouch™ Web Pages Introduction As the SpeedTouch™ web pages are controllable from any Operating System with an installed web browser, the method to establish PPP sessions described below you can use on any computer system. For more information on Internet connection setup, see the provided Installation and Setup Guide.
  • Page 46 Chapter 3 Internet Connectivity Dial-In Clients Terminating an Internet session To close an active PPP connection: Go to the SpeedTouch™ Home page. Click Disconnect at the appropriate broadband connection. As a result the SpeedTouch™’s embedded PPP dial-in client will close the Internet connection.

  • Page 47: Igd Control Agent

    3.2 IGD Control Agent Introduction MS Windows XP users can easily establish PPP sessions, thanks to MS Windows XP’s Internet Gateway Device (IGD) Discovery and Control Client that allows you to control the SpeedTouch™ directly from you PC. Preconditions Following conditions must be met: Following subcomponents of Windows XP’s Networking Services must be added to your Windows XP system: UPnP™...
  • Page 48 Chapter 3 Internet Connectivity Dial-In Clients Internet connection status Terminating an Internet session As long as the SpeedTouch™’s embedded PPP dial-in client is connected, you are able to overview the connection status and some counters by double-clicking the Internet Connection icon in your PC’s Network Connections window: Proceed as follows: In the Windows task bar, click Start.

  • Page 49: Ms Windows Xp Broadband Connection

    3.3 MS Windows XP BroadBand Connection Prerequisites To be able to use the MS Windows XP BroadBand Connection, your SpeedTouch™ must be configured for either: Bridging, or PPPoE Relay Configuring a Proceed as follows: broadband connection On the Start menu, click (Settings >) Control Panel. The Control Panel window appears.
  • Page 50 Chapter 3 Internet Connectivity Dial-In Clients Select whether the connection will be available to any user or only to yourself: Fill in the Internet account information. This information should be provided by your service provider: At the end of the configuration the following window appears: Click Finish to complete the configuration.
  • Page 51 Starting a broadband Proceed as follows: Internet session On the Start menu, point Connect To and click the name of the connection you’ve created, for example YourISP. The Connect YourISP window appears: If requested, enter user name and password for your user account at the Service Provider.
  • Page 52 Chapter 3 Internet Connectivity Dial-In Clients Terminating a broadband Internet session Proceed as follows: On the Start menu, point Connect To and click the name of the connection you’ve created, for example YourISP. If you are using the Classic Start menu go to Start > Settings > Network (and Dial-up) connections >...

  • Page 53: Mac Os X Pppoe Dial-In Client

    3.4 Mac OS X PPPoE Dial-in Client Prerequisites To be able to use the MS Windows XP BroadBand Connection, your SpeedTouch™ must be configured for either: Bridging, or PPPoE Relay Configuring a Proceed as follows: broadband connection On the Apple menu, click System Preferences. In the System Preferences window, click the Network icon.
  • Page 54 Chapter 3 Internet Connectivity Dial-In Clients Starting a broadband Internet session Terminating a broadband Internet session Proceed as follows: Click the Internet Connect dockling. If the Internet Connect dockling is not available, go to the Applications folder on the system startup disk and double-click Internet Connect. The following window appears: Make sure Built-in Ethernet is selected in the Configuration list.

  • Page 55: Basic Configuration

    4 Basic Configuration Introduction The SpeedTouch™ comes with embedded HTML pages, providing an interface to the software installed on the device. It allows easy setup and management of the SpeedTouch™ via your web browser form any PC connected to the SpeedTouch™. “1.3.1 Access via the Web Interface”...

  • Page 56: Navigation

    Chapter 4 Basic Configuration 4.1 Navigation Navigation components The SpeedTouch™ web interface consists of following components: Menu Language Bar Navigation Bar Notification Area Tasks Navigation bar Notification area Menu Language bar Tasks E-DOC-CTC-20050429-0104 v1.0...

  • Page 57: Menu

    4.1.1 Menu Menu items The menu is located on the left side of the page and consists of the following menu items: SpeedTouch: Provides basic information on the SpeedTouch™. Broadband Allows you to view/configure your broadband connections. Toolbox: Allows you to assign games or applications to a device and secure your Internet connection.

  • Page 58: Language Bar

    Chapter 4 Basic Configuration 4.1.2 Language Bar Language bar The language bar is located under the SpeedTouch™ logo and allows you to change the language of the SpeedTouch™ web interface. The language bar will only be shown if more than one language is available. E-DOC-CTC-20050429-0104 v1.0...

  • Page 59: Navigation Bar

    4.1.3 Navigation Bar Navigation bar The navigation bar is located on the top of the page and allows you to: View the current user name. Click this name to change your password or switch to another user. View the current position on the SpeedTouch™ web interface. Get context related Help information.

  • Page 60: Notification Area

    Chapter 4 Basic Configuration 4.1.4 Notification Area Notification area The notification area is located under the Error messages indicated by a red traffic light. Warnings indicated by an orange traffic light. Information indicated by a green traffic light. If none of these events occur, the notification area will not be shown. Navigation Bar and is used to display: E-DOC-CTC-20050429-0104 v1.0...

  • Page 61: Tasks

    Chapter 4 Basic Configuration 4.1.5 Tasks Tasks To allow a swift configuration of your SpeedTouch™, some pages may offer you a number of related tasks. These tasks will guide you to the page where you can perform the selected task. E-DOC-CTC-20050429-0104 v1.0...

  • Page 62: Home

    Chapter 4 Basic Configuration 4.2 Home SpeedTouch™ home page The SpeedTouch™ home page gives you a short overview of all the configurable aspects of the SpeedTouch™: SpeedTouch Broadband Connection Toolbox Office Network E-DOC-CTC-20050429-0104 v1.0...

  • Page 63: Speedtouch

    4.3 SpeedTouch The SpeedTouch menu The SpeedTouch menu consists of following items: Information Configuration Event Logs Update The SpeedTouch page The SpeedTouch page gives you some basic information on the SpeedTouch™: Product Configuration E-DOC-CTC-20050429-0104 v1.0 Information Chapter 4 Basic Configuration...

  • Page 64: Information

    Chapter 4 Basic Configuration 4.3.1 Information Information The Information page summarizes important information on your SpeedTouch™. You may need this information when you contact your helpdesk. E-DOC-CTC-20050429-0104 v1.0...

  • Page 65: Speedtouch™ Easy Setup

    4.3.2 SpeedTouch™ Easy Setup Easy Setup Wizard This wizard helps you configure your SpeedTouch™ Internet connection. To configure the SpeedTouch™ using the SpeedTouch™ Easy Setup wizard: On the left menu, click SpeedTouch. In the Pick a task... list, click Set up. The Easy Setup wizard will now guide you through the configuration of your SpeedTouch™.

  • Page 66: Restart

    Chapter 4 Basic Configuration 4.3.3 Restart Accessing the Restart page Restarting your SpeedTouch™ Proceed as follows: On the left menu, click SpeedTouch. In the Pick a task... list, click Restart. Proceed as follows: Click Yes, restart my SpeedTouch. The SpeedTouch™ restarts. The SpeedTouch™...

  • Page 67: Configuration

    4.3.4 Configuration Overview The Overview page displays the current configuration of your SpeedTouch™. Details The Details page displays more detailed information on the current configuration of your SpeedTouch™. Configure The Configure page allows you to change the current configuration. If you want to: Reconfigure your SpeedTouch™: Click Configuration Wizard under Service Configuration.

  • Page 68: Backup & Restore

    Chapter 4 Basic Configuration 4.3.5 Backup & Restore Introduction Accessing the Backup & Restore page Saving your current configuration Restoring a previously saved configuration This page allows you to: Save your current configuration. Restore a previously saved configuration. Proceed as follows: On the SpeedTouch menu, click Configuration.

  • Page 69: Reset To Factory Defaults

    4.3.6 Reset to Factory Defaults Introduction This page allows you to reset the SpeedTouch™ to return to the initial configuration of your SpeedTouch™. All your changes will be deleted. Accessing the Reset to Proceed as follows: Factory Defaults page On the left menu, click SpeedTouch. In the Pick a task...

  • Page 70: Event Logs

    Chapter 4 Basic Configuration 4.3.7 Event Logs Event Logging Recorded Events table The Event Logs page summarizes the latest events recorded on your SpeedTouch™. The Recorded Events table gives you an overview of the latest event logs that have been recorded since power on. The first column of the table indicates the importance of the event log Indicator Description...

  • Page 71: Update

    Chapter 4 Basic Configuration 4.3.8 Update Updating the The Update page allows you to: SpeedTouch™ system View System Information. software View information on the current System Firmware. Update your SpeedTouch™ from a remote server. Use this option if you want to have yourSpeedTouch™ check on the internet for new firmware and update if it found one.

  • Page 72: Broadband Connection

    Chapter 4 Basic Configuration 4.4 Broadband Connection The Broadband Connection menu The Broadband Connection page The Broadband Connection menu consists of following menu items: DSL Connection Internet Services The Broadband Connection page gives you a short status overview of the connections configured on the SpeedTouch™.

  • Page 73: Connectivity Check

    4.4.1 Connectivity Check Introduction This page enables you to perform a connectivity check on an Internet service of your SpeedTouch™. Accessing the Proceed as follows: Connectivity Check page On the left menu, click Broadband Connection. In the Pick a task... list, click Check connectivity to the Internet. Checking you Internet Proceed as follows: Connectivity...

  • Page 74: Dsl Connection

    Chapter 4 Basic Configuration 4.4.2 DSL Connection Overview Details Click Overview to view brief information on your DSL connection. Click Details to view a more detailed information on your DSL connection. E-DOC-CTC-20050429-0104 v1.0...

  • Page 75: Internet Services

    4.4.3 Internet Services Internet Services The Internet Services page displays information on your Internet Connection(s). information To view more detailed information on a specific connection, click the View more... link of the corresponding connection. E-DOC-CTC-20050429-0104 v1.0 If you configured a dial-up connection you are able to establish/terminate the connection by clicking Connect/Disconnect.

  • Page 76: Internet Service Settings

    Chapter 4 Basic Configuration 4.4.4 Internet Service Settings Accessing the Internet Service Settings page Overview Details Proceed as follows: On the Broadband Connection menu click Internet Services. Click the View more link of the internet service you want to view. The Overview page gives you basic information on the selected Internet Service.

  • Page 77: Toolbox

    4.5 Toolbox The Toolbox menu The Toolbox menu consists of following menu items: Remote Allows you to make your SpeedTouch™ accessible for remote support. Game & Application Allows you to share services and games that you run in your private network towards the internet.

  • Page 78: Remote Assistance

    Chapter 4 Basic Configuration 4.5.1 Remote Assistance Enabling Remote Assistance This page allows you to make your SpeedTouch™ accessible for remote support. You must be connected to the Internet to be able to enable remote assistance. To use remote assistance: If needed, type a password in the Password box.

  • Page 79: Game & Application Sharing

    4.5.2 Game & Application Sharing Overview The Overview page summarizes the games and applications on a particular host on your network, for which the SpeedTouch™ accepts connections coming from the Internet. Configure The Configuration page allows you to: Select Use UPnP to enable UPnP on the SpeedTouch™. Select Use Extended Security to only allow the creation of port maps.

  • Page 80: Defined Games & Applications

    Chapter 4 Basic Configuration 4.5.3 Defined Games & Applications Accessing the Defined Games & Applications page The Defined Games & Applications page Proceed as follows: In the Toolbox menu, click Game & Application Sharing. In the Pick a task... list, click Modify a game or application. This page gives you an overview of the games and applications defined on your SpeedTouch™.

  • Page 81: Game Or Application Definition

    4.5.4 Game or Application Definition Accessing the Game or Proceed as follows: Application Definition In the Toolbox menu, click Game & Application Sharing. page In the Pick a task... list, click Modify a game or application. Click the name of the game or application you want to view/change. Overview This page gives you an overview of the port mappings used to allow this service or game to be initiated from the Internet.

  • Page 82: New Game Or Application

    Chapter 4 Basic Configuration 4.5.5 New Game or Application Accessing the Game or Application Definition Creating a new game or application Proceed as follows: On the Applications page, click Game & Application Sharing. In the Pick a task... list, click Create a new game or application. Proceed as follows: Type the name of the game or application in the Name box.

  • Page 83: Web Site Filtering

    4.5.6 Web Site Filtering Web Site Filtering The SpeedTouch™ allows you to block/allow particular web sites: Based on the web site’s URL. Based on the web site’s content. Redirect a web site to another web site. Overview The Overview page displays: The current Address Based Filtering rules.
  • Page 84 Chapter 4 Basic Configuration Deny access to a specific web site Allow access to a specific web site Redirect a web site Use this feature if: Allow is selected under Action for Unknown Sites. Block is selected under Action for Unknown Sites and you want to make an exception on an allow rule.
  • Page 85 Redirecting all web Proceed as follows: sites Type “*” in the Web Site box. Click Redirect in the Action list. Type the URL of the web site you want to redirect to (for example “mycompany.com/internetpolicy.htm”) in the Redirect box. Click Add. Type the URL of the web site you want to redirect to (for example “mycompany.com/internetpolicy.htm”) in the Web Site box.

  • Page 86: Web Filtering Activation

    Chapter 4 Basic Configuration 4.5.7 Web Filtering Activation Accessing this page Web Filtering Activation page Standard license activation Proceed as follows: On the Toolbox menu, click Parental Control. In the Pick a task... list, click Activate Web filtering License. This page allows you to: Activate a Web Filtering evaluation license.

  • Page 87: Content Level

    4.5.8 Content Level Accessing this page Proceed as follows: On the Toolbox menu, click Parental Control. Click Configure. Click the Edit link of the content level you want to edit. Overview This page gives you an overview of the different categories and their rules. Following icons indicate whether the content type is allowed or not: Icon Configure...

  • Page 88: New Content Level

    Chapter 4 Basic Configuration 4.5.9 New Content Level Introduction Procedure Content level creation Content level configuration Content level definition This page allows you to create a new content level. To access this page: On the Toolbox menu, click Parental Control. In the upper right corner, click Configure.
  • Page 89 Content level activation To activate your new content level: On the Toolbox menu, click Parental Control. In the upper right corner, click Configure. In the Content Level list, select your new content level. The new content level is now active. E-DOC-CTC-20050429-0104 v1.0 Chapter 4 Basic Configuration...

  • Page 90: Firewall

    Chapter 4 Basic Configuration 4.5.10 Firewall Overview Configure The Overview page summarizes the overall security policy configured on your SpeedTouch™. The Configure page allows you to select the security level of the SpeedTouch™. Select one of following security levels: Medium: Use this Security Level to allow all outgoing connections except Windows protocols (Netbios, RPC, SMB) and block all incoming connections.

  • Page 91: Intrusion Detection

    Chapter 4 Basic Configuration 4.5.11 Intrusion Detection Intrusion Detection Your SpeedTouch™ is protecting your network against malicious intrusions. This page shows you the intrusions you are protected against. The Protected Intrusions table shows the number of times the SpeedTouch™ actively protected your network against each intrusion since last statistics reset.

  • Page 92: Dynamic Dns

    Chapter 4 Basic Configuration 4.5.12 Dynamic DNS What is Dynamic DNS Overview Configure The Dynamic DNS service allows you to assign a dynamic DNS host name (e.g. john.dyndns.org) to a broadband connection even if it is using a dynamic IP address. As soon as the device gets a new IP address, the dynamic DNS server updates its entry to the new IP address.

  • Page 93: User Management

    4.5.13 User Management Overview The Overview page gives you an overview of the currently configured users and their privileges. Clicking the name of a user allows you to edit his user account. Configure The Configure page allows you to: Click Add to create a new user account. Click Delete to remove a user.

  • Page 94: Edit User

    Chapter 4 Basic Configuration 4.5.14 Edit User Accessing the User Edit page Editing a user account Proceed as follows: On the Toolbox menu, click User Management. Under Local User Data, click on the name of the user you want to edit. The Edit User page allows you to: Click Reset Password to reset the password of the selected user to the user name.

  • Page 95: Change Default User

    4.5.15 Change Default User Changing the default This page allows you to change the default user. If users browse to the user SpeedTouch™ web pages, they will be automatically logged in under this account. E-DOC-CTC-20050429-0104 v1.0 To allow users to automatically log on under this account, this default user account must be configured with a blank password.

  • Page 96: Add User

    Chapter 4 Basic Configuration 4.5.16 Add User Adding users This page allows you to add a new user. Under User definition you can configure: The name of the new user. The password of the new user will be equal to the user name; for example if the user name is John Doe, the password will be John Doe.

  • Page 97: Office Network

    4.6 Office Network Office Network Menu This menu consists of following items: Devices Allows you the view/configure the devices detected on your local network. Interfaces Allows you to view/configure the interfaces that are available on the SpeedTouch™. The Office Network The Office Network gives you an overview of your SpeedTouch™...

  • Page 98: Devices

    Chapter 4 Basic Configuration 4.6.1 Devices Overview Configure The Overview page gives you an overview of the devices that are currently connected to the SpeedTouch™ network. Click on a device name to get more information on a specific device. The Configure page gives you an overview of the devices that are currently connected to the SpeedTouch™...

  • Page 99: Device Settings

    4.6.2 Device Settings Accessing the device Proceed as follows: settings page On the Office Network menu, click Devices. In the Detected Device(s), click the name of the device you want to view. Overview The Overview page displays following information: Information allows you to view: Addressing allows you to view: Connection Sharing: Gives you an overview of the games or services that are currently assigned to...

  • Page 100: Assign Public Ip

    Chapter 4 Basic Configuration 4.6.3 Assign Public IP Introduction Accessing the Assign Public IP page Assigning the public IP address to a device This page allows you to assign the public IP address of your Internet Connection(s) to a specific device on your local network. You might want to do this if: You do not want to use the Network Address Translation engine of your SpeedTouch™.

  • Page 101: Wireless Device Settings

    4.6.4 Wireless Device Settings Accessing the wireless Proceed as follows: device settings page On the Office Network menu, click Devices. In the Detected Device(s), click the name of the wireless device you want to view. Overview The Overview page displays following information: Information allows you to view: Addressing allows you to view: Connection Sharing:...

  • Page 102: Access Point Settings

    Chapter 4 Basic Configuration 4.6.5 Access Point Settings Accessing the Access Point settings Overview Details Configure Proceed as follows: On the left menu, click Office Network. Under Wireless, click the name of the Access Point you want to view or configure.
  • Page 103 Under Security following fields are available: Broadcast Network Name: By default the SpeedTouch™ broadcasts its network name, allowing you to easily recognise your wireless network in the list of available networks. Once you have configured your wireless clients, it is recommended to disable this feature by clearing this check box.
  • Page 104 Chapter 4 Basic Configuration WPA-PSK Access control on the SpeedTouch™ Registering new wireless clients The SpeedTouch™ supports WPA-PSK which has 3 improvements regarding to WEP: Authentication via a 4-way handshake to check whether the Pre-Shared Keys (PSKs) are the same. Stronger encryption types: Temporal Key Integrity Protocol (TKIP) (default): Instead of using a fixed WEP key, TKIP uses in pairs temporary session keys which are...

  • Page 105: Configuring Wds

    4.6.6 Configuring WDS What is WDS The Wireless Distribution System (WDS) allows you to extend the range of your wireless network by introducing one or more WDS-enabled devices into your wireless network. Accessing the WDS To access the WDS pages on the SpeedTouch™: page On the left menu, click Office Network.

  • Page 106: Interfaces

    Chapter 4 Basic Configuration 4.6.7 Interfaces Interfaces overview This page gives you an overview of the interfaces used on your SpeedTouch™. If you want to know more on the network settings of a specific interface, click the name of the interface you want to view. E-DOC-CTC-20050429-0104 v1.0...

  • Page 107: Interface Settings

    4.6.8 Interface Settings Overview The Overview page gives you an overview of the current interface settings. Configure The Configure page allows you to: Change the IP address settings of the SpeedTouch™. Change the DHCP IP address pool settings. Assigning a new IP Under IP Addresses: address to the Type the IP address of your choice (for example 192.168.1.1) in the left text...

  • Page 108: Dhcp Pool

    Chapter 4 Basic Configuration 4.6.9 DHCP Pool DHCP Pool Accessing the DHCP Pool page This page allows you to create/change a DHCP pool. Proceed as follows: On the Office Network menu, click Interfaces. Click on the name of the interface of which you want to change the DHCP pool settings.
  • Page 109 The DHCP Pool page Following settings are available for configuration: Interface: The SpeedTouch™ interface for which the DHCP pool applies. Start Address: The start IP address of the DHCP server’s address pool. End Address: The end IP address of the DHCP server’s address pool. Subnet Mask: The subnet mask of the DHCP server’s address pool.
  • Page 110 Chapter 4 Basic Configuration E-DOC-CTC-20050429-0104 v1.0...

  • Page 111: Expert Configuration

    5 Expert Configuration Introduction The SpeedTouch™ Expert Mode pages allows for advanced configuration and maintenance of your SpeedTouch™ device. While the Basic pages are mainly constructed to allow you to overview and diagnose the running product and its configuration, the Expert Mode pages have been designed to allow in-depth configuration of every aspect of your SpeedTouch™.
  • Page 112 Chapter 5 Expert Configuration Expert Mode navigation The Navigation and notification area displays the current user and the site navigator, as well as notification messages, if applicable. In addition, following action buttons are always available on every page: Click ... To ...

  • Page 113: Home

    Chapter 5 Expert Configuration 5.1 Home Overview The Expert Mode Home page is in fact the same as the SpeedTouch™ Home page in Basic Mode; it provides an instant overview of all aspects of your SpeedTouch™ configuration and operational status. For more information, see Home Basic Configuration...

  • Page 114: Speedtouch

    Chapter 5 Expert Configuration 5.2 SpeedTouch™ Overview The SpeedTouch™ menu consists of the following topics: Click ... To ... Easy Setup start the embedded Easy Setup wizard. System Information view important SpeedTouch™ information. Connections start/stop PPP connection sessions. Diagnostics view detailed system and configuration information of the SpeedTouch™...

  • Page 115: Easy Setup

    Chapter 5 Expert Configuration 5.2.1 Easy Setup Introduction Click Easy Setup to start the SpeedTouch™ Easy Setup wizard. The Easy Setup wizard provides an easy way to prepare the SpeedTouch™ for Internet connectivity. Depending on the installed wizard templates (see “...

  • Page 116: System Information

    Chapter 5 Expert Configuration 5.2.2 System Information Overview Diagnostics DSL Line Info Configuration The System Information page is the SpeedTouch™ expert start page. It consists of four sections: Diagnostics DSL Line Info Configuration System Select Diagnostics to view the results of the System Self Test, LAN connectivity and DSL synchronisation test: If result is...
  • Page 117 System Select System to view some important system information of the SpeedTouch™. The System table lists the SpeedTouch™’s: Product Name Physical Address. This worldwide unique hardware address is also called Medium Access Control (MAC) address. Software Release Board Name Serial Number Product Code E-DOC-CTC-20050429-0104 v1.0 Most of the information is also listed on the identification label on the...

  • Page 118: Connections

    Chapter 5 Expert Configuration 5.2.3 Connections Overview Connections Start/stop PPP sessions The Connections page allows you to start and stop PPP connection sessions. All existing PPP connections are listed in the If no PPP connections have been defined, this table is empty. In the Connections table, per interface, following information is provided: Interface: the name of the PPP connection interface Destination: the name of the ATM interface of the PPP connection...

  • Page 119: Diagnostics

    5.2.4 Diagnostics Overview The Diagnostics page provides in-depth information, counters and statistical data on the SpeedTouch™ system settings, and its LAN and WAN connections. The diagnostics are broken down into three expandable categories: System Per category an overall status is displayed: If the status is ...

  • Page 120: Syslog

    Chapter 5 Expert Configuration 5.2.5 Syslog Overview Messages Configuration The Syslog page consists of two sections: Messages Configuration This section allows to overview system log and alert messages your SpeedTouch™ generated during operation. System log messages are used to provide a historical overview of events, errors, and messages generated during SpeedTouch™...
  • Page 121 To change or delete a destination: Select the applicable interface If needed, make your changes and click: Facility Following priority facilities are possible for a syslog message generated by the SpeedTouch™. The facilities are listed by descending priority, each followed by (notation, priority value): Kernel messages (kern, 0) User-level messages (user, 8)

  • Page 122: System Update

    Chapter 5 Expert Configuration 5.2.6 System Update Overview System configuration Upload system files The System Update page features all means for management and maintenance of your SpeedTouch™. It consists of two sections: System configuration System Upgrade The System Configuration section allows you to manage locally stored system files. Select: Upload File to upload a system file to the SpeedTouch™.
  • Page 123 To upload system files: Click Browse to specify the file on your local drive you wish to upload. Click Upload to upload the system file to your SpeedTouch™. Manage configuration This table allows you to view configuration files that are currently stored on your files SpeedTouch™.
  • Page 124 Chapter 5 Expert Configuration System Upgrade Upload system software Switch to another system software version The System Upgrade section allows you to manage your SpeedTouch™’s system software and upload or apply a new system software. For extended management reasons and roll-back scenarios your SpeedTouch™ provides storage room for two system software packages: the active system software the SpeedTouch™...

  • Page 125: Speedtouch™ Services

    5.2.7 SpeedTouch™ Services Overview The SpeedTouch™ Services page allows you to view and configure all services that are currently configured on your SpeedTouch™. The purpose of this page is to centralise the management of all SpeedTouch™ embedded Services and Applications, or otherwise stated, all internal modules and engines of the SpeedTouch™...
  • Page 126 Chapter 5 Expert Configuration Edit SpeedTouch™ service properties Editing SpeedTouch™ services might be useful in cases where you want to hide/ protect the service by deviation from the typical service settings or restricting access from/to interfaces. However; Do not edit SpeedTouch™ system services unless specifically needed. To edit a SpeedTouch™...
  • Page 127 SpeedTouch™ service The SpeedTouch™ service can be of following type: types Type Client Server Peer Proxy Relay Group Transparent-Map Dynamic Sibling Shared E-DOC-CTC-20050429-0104 v1.0 Indicates a SpeedTouch™ service that... is the originator of an IP connection (source IP packets). is the responder of an IP connection (listening to IP packets).

  • Page 128: Sntp

    Chapter 5 Expert Configuration 5.2.8 SNTP Overview SNTP Client Manual The Simple Network Time Protocol (SNTP) web page allows you to configure the SpeedTouch™ real-time clock. The page contains two sections: SNTP Client Manual Selecting Manual immediately disables consequence the SpeedTouch™ real-time clock will no longer be periodically synchronised with an Internet time server.

  • Page 129: Sla

    5.2.9 SLA Overview The Service Level Agreement (SLA) page allows you to view and configure ping and traceroute tests. The page contains two sections: Select Select Ping The Ping table provides a list of configured ping test entries. By default no ping tests are configured. To add a ping test see test.
  • Page 130 Chapter 5 Expert Configuration Ping tests and results Traceroute To start/stop a ping test: Select the ping test entry. Click: Activate to start the ping test. Deactivate a ping test that is currently running. To view the results of the ping test: Select the ping test entry, if needed.
  • Page 131 Add/delete a To add a traceroute test entry: traceroute test Click New (if an entry is currently selected, click Cancel first). Type a name for the traceroute test entry. Type the host name or IP address of the target to traceroute. Click Apply.

  • Page 132: Add-On

    Chapter 5 Expert Configuration 5.2.10 Add-on Overview Some of the SpeedTouch™'s extended functionalities require a software activation key to enable the corresponding software module. To acquire a software activation key for activating a SpeedTouch™ software module, proceed as follows: Click the name of the software module you intend to activate. This link will forward you to the SpeedTouch™...

  • Page 133: Ip Router

    5.3 IP Router Overview The IP Router menu consists of the following topics: Click ... IP Addresses Expressions Classification IP Routing IP QoS E-DOC-CTC-20050429-0104 v1.0 To ... view/configure the IP addresses assigned to any of the SpeedTouch™ interfaces. view/configure interface, or IP, or Service related expressions.

  • Page 134: Ip Addresses

    Chapter 5 Expert Configuration 5.3.1 IP Addresses Overview Add/change an IP address The IP address table shows all IP addresses configured on any of SpeedTouch™’s interfaces. In the table following information is provided per IP address: The Interface to which the IP address applies The IP address/Netmask (in prefix notation) The IP address Type, being either: auto, in case the address has been automatically assigned by the...

  • Page 135: Expressions

    5.3.2 Expressions Overview Expressions are used in rules for source and destination interface, source and destination IP address(es) (ranges) and services. The Expressions page consists of three sections: Interface Service Interface The Interface section bundles all expressions that express a relation based on Interfaces.
  • Page 136 Chapter 5 Expert Configuration Adding an IP related expression Service Adding a service related expression The IP section bundles all expressions that express a relation based on IP addresses. The Expressions table provides following information per expression: The Name of the expression A Summary of the expression’s configuration.

  • Page 137: Classification

    5.3.3 Classification Overview The Classification page consists of three section: Labels, providing a list of existing packet classification labels and abilities to add/modify or delete packet classification label entries. Routing Rules allow you to associate a routing label (used in data flow by means of classification rules.
  • Page 138 Chapter 5 Expert Configuration Routing Rules IP QoS Rules The Routing Rules section provides an overview of the existing routing rules. Proceed as follows to create a new rule: Click New to create a new rule. Fill in all the fields. Index: The index of the label rule.

  • Page 139: Ip Routing

    5.3.4 IP Routing Overview The IP Routing table presents the current content of the SpeedTouch™ Routing Information Base. It contains all routes to all possible destinations and is consulted by the SpeedTouch™ any time prior to sending or forwarding any packets. Similar to the IP address table, a number of IP Routes are pre-configured.

  • Page 140: Rip

    Chapter 5 Expert Configuration 5.3.5 RIP Overview Configuration Interfaces Neighbours The RIP web page contains three tabs: Configuration Interfaces Neighbours The Configuration section allows you to enable/disable the SpeedTouch™ RIP functionality and configure the some basic RIP settings. The RIP Interfaces table allows you to configure interface specific RIP settings such Override the master RIP status (enable/disable) Override the master RIP version, separately for receiving and sending RIP messages...

  • Page 141: Nat

    5.3.6 NAT Overview The NAT menu consists of following sections: Interfaces Mappings Templates Interfaces The Interface page allows you to enable/disable NAPT on a specific interface. Proceed as follows to enable/disable an interface: Select the interface that has to be enabled/disabled Click Save All to make the settings permanent.
  • Page 142 Chapter 5 Expert Configuration Creating a NAT mapping Templates Creating a NAT template Proceed as follows to create a address translation mapping: Click New to create a new map. Select or fill in all the fields (see above). Click Apply. The Template page allows you to create a NA(P)T template.

  • Page 143: Ip Qos

    Chapter 5 Expert Configuration 5.3.7 IP QoS Definition Quality of Service is the ability for an application to obtain the network service it requires for successful operation. Nowadays the total amount of data traffic increases, while new types of data emerge, like: voice data, video data, audio data. These new types of data pose new requirements for data transport, e.g.
  • Page 144 Chapter 5 Expert Configuration Configuration The Configuration page allows you to configure IPQoS for a given destination interface for the IPQoS queues instantiation. When enabling or disabling IPQoS, take the following into account: if the WAN interface (for example PPPoA, IPoA,...) is detached at the time of enabling/disabling IPQoS, then the WAN interface has to be attached in order for the enabling/disabling of IPQoS to take effect.

  • Page 145: Connections

    5.4 Connections Overview The Connections menu consists of the following topics: Click ... Routed PPPoE Routed PPPoA Routed PPPoI Bridged Ethernet Routed Ethernet Routed IPoA PPTP-to-PPP Relay Virtual LAN E-DOC-CTC-20050429-0104 v1.0 To ... view/configure SpeedTouch™’s ATM interfaces. view/configure the Routed PPP over Ethernet (PPPoE) Internet services.

  • Page 146: Atm

    Chapter 5 Expert Configuration 5.4.1 ATM Overview Phonebook Adding a phonebook entry Connection Service Name Virtual Channel Identifiers (VPI and VCI) The ATM page consists of following sections: Phonebook QoS Book Interfaces The SpeedTouch™ Phonebook is a repository for ATM connectivity information. A number of pre-configured entries may already reside in the SpeedTouch™...
  • Page 147 It is the responsibility of the network operator to provide end-to-end connectivity throughout the network on these virtual channels. Due to regional differences or because of the specific policy of your local operator, specific VPI/VCI values may be required. In this case, the network operator, ISP or corporate administrator will provide the correct values.

  • Page 148: Routed Pppoe

    Chapter 5 Expert Configuration 5.4.2 Routed PPPoE Introduction Creating a Routed PPPoE connection entry Additional configuration Routing The Routed PPPoE configuration page allows you to add new Routed PPPoE, or Routed PPPoE Relay connection entries or to change settings of existing entries. To add a Routed PPPoE connection entry: Click New.
  • Page 149 Other This window holds miscellaneous information and configuration possibilities. Following fields are available: Mode: A PPP connection can be established in three ways: Idle Time Limit: Allows you to specify after which time limit the PPP connection is released. Otherwise stated, if no traffic passes over the PPP connection for Idle Time, the connection is closed.

  • Page 150: Routed Pppoa

    Chapter 5 Expert Configuration 5.4.3 Routed PPPoA Introduction Creating a Routed PPPoA connection entry Additional configuration Routing The Routed PPPoA configuration page allows you to add new Routed PPPoA connection entries or to change settings of existing entries. To add a Routed PPPoA connection entry: Click New.
  • Page 151 Other This window holds miscellaneous information and configuration possibilities. Following fields are available: Mode: A PPP connection can be established in three ways: Idle Time Limit: Allows you to specify after which time limit the PPP connection is released. Otherwise stated, if no traffic passes over the PPP connection for Idle Time, the connection is closed.

  • Page 152: Routed Pppoi

    Chapter 5 Expert Configuration 5.4.4 Routed PPPoI Availability Introduction Creating a Routed PPPoI connection entry Additional configuration Routing The ISDN modem is only fully functional after activating the ISDN software module with the ISDN software module activation key. For more information, see “5.2.10 Add-on”...
  • Page 153 Other This window holds miscellaneous information and configuration possibilities. Following fields are available: Mode: A PPP connection can be established in three ways: Idle Time Limit: Allows you to specify after which time limit the PPP connection is released. Otherwise stated, if no traffic passes over the PPP connection for Idle Time, the connection is closed.

  • Page 154: Bridged Ethernet

    Chapter 5 Expert Configuration 5.4.5 Bridged Ethernet Overview Bridged Ethernet Bridge properties The Bridged Ethernet page consists of following sections: Bridged Ethernet VLAN The Bridged Ethernet page allows you to configure the SpeedTouch™ for IEEE802.1D Transparent Bridging, which equally may include preparing it for Bridged PPPoE. Next to transparent bridging, the SpeedTouch™...
  • Page 155 Add a new Bridge port Proceed as follows to add a new port to the Ethernet Bridge: Click New under the Bridge Ethernet overview table In the Interface box, type a unique interface name; in the Destination list, select the interface you want to use for this connection. Mark the Multicast filter checkbox if you wish to filter out multicast streams on this interface.
  • Page 156 Chapter 5 Expert Configuration VLAN interface configuration Proceed as follows to add or remove Bridged Ethernet interfaces for a certain VLAN: Select the VLAN you wish to edit. A listing of all bridge interfaces will appear, each followed by a drop-down list. Change the value of the drop-down list to add or remove interfaces from this VLAN: (none), which means that this interface is not a member of the selected...

  • Page 157: Routed Ethernet

    Chapter 5 Expert Configuration 5.4.6 Routed Ethernet Introduction The Routed Ethernet web page allows you to add and modify Routed Ethernet interfaces. Routed Ethernet interfaces can be used for creating end-to-end MAC Encapsulated Routing (MER) connections, or for creating a destination interface to create Routed PPPoE connections on, or to apply a routed PPPoE Relay scenario.

  • Page 158: Routed Ipoa

    Chapter 5 Expert Configuration 5.4.7 Routed IPoA Creating a new Routed IPoA Ethernet Interface Generated IP routes To add a new Routed IPoA Ethernet interface, proceed as follows: Click New. Following fields become available: Interface Name: Is a name that has local significance only and allows to reference a particular Routed IPoA interface Local IP Address: Is an IP address that must be configured on the local Routed IPoA...

  • Page 159: Pptp-To-Ppp Relay

    Chapter 5 Expert Configuration 5.4.8 PPTP-to-PPP Relay Overview The PPTP-to-PPP Relay, referred to as "Relay" further in this section, interacts with a PPTP tunneling application installed on the locally attached computers, for example Microsoft's Dial-Up Networking. A typical user-relay interaction scenario is as follows: A PPTP Tunnelling application is started on one of the locally attached computers.

  • Page 160: Virtual Lan

    Chapter 5 Expert Configuration 5.4.9 Virtual LAN Concept The Virtual LAN page Creating a new VLAN Using VLAN The concept of VLAN was introduced as a way to solve many of the issues of a large Layer 2 environment. It controls the traffic on a physical LAN. The physical LAN is partitioned into multiple virtual LANs.

  • Page 161: Local Networking

    5.5 Local Networking Overview The Connections menu consists of the following topics: Click ... DHCP Managed Switch Wireless E-DOC-CTC-20050429-0104 v1.0 To ... View/configure the SpeedTouch™ DHCP settings. View/configure the SpeedTouch™ DNS settings. View/configure the SpeedTouch™ Managed Switch. View/configure the SpeedTouch™ wireless access point settings.

  • Page 162: Dhcp

    Chapter 5 Expert Configuration 5.5.1 DHCP Overview DHCP Server Server Config The DHCP web page offers three tabs to configure the SpeedTouch™ 's DHCP functionality: DHCP Server: To configure the general behaviour of the SpeedTouch™ 's DHCP server. DHCP Relay: To configure the SpeedTouch™...
  • Page 163 Server Leases In case the SpeedTouch™ DHCP server is running this table holds all leases which are assigned by the DHCP server to (accepted) DHCP clients. Following lease parameters are shown : Client ID: The MAC address of the DHCP client. Address: The IP address leased by the DHCP client.
  • Page 164 Chapter 5 Expert Configuration Address Pools Address pool types One or more disjunctive DHCP server address pools can be created per existing SpeedTouch™ interface using the Address Pool table. The first address pool displayed in the table has the highest priority for a certain interface. If you select one of the address pools, following fields become available: Name: The name of the DHCP server's address pool.
  • Page 165 DHCP Relay The DHCP relay tab allows you to add/delete and overview SpeedTouch™ 's DHCP relay interfaces. The DHCP relay configuration is split up in two sections: Relay Config To add/delete and configure a DHCP relay server on a certain interface Relay Interfaces To enable/disable and define the behaviour of the DHCP relay agent per configured interface.
  • Page 166 Chapter 5 Expert Configuration DHCP Client Dynamic interfaces are created and managed by means of the DHCP Client table. Following fields are listed in the DHCP Client table: Interface: The name of the SpeedTouch™ logical interface for which this DHCP client applies The Address column shows the IP address assigned to the interface given in the first column.

  • Page 167: Dns

    5.5.2 DNS Overview DNS is short for Domain Name System. It is a network functionality that allows network members to use host names rather than IP addresses for referencing networked computers. The DNS web page consists of two sections: Configuration Hostname Table Configuration In addition to the host name, a local computer needs the DNS domain name to...

  • Page 168: Managed Switch

    Chapter 5 Expert Configuration 5.5.3 Managed Switch Overview Managed Ethernet Switch Your SpeedTouch™ is equipped with a four-port 10/100Base-T auto-sensing MDI/ MDI-X Ethernet switch. Each physical Ethernet port of the switch can be managed individually for extended networking control and monitoring purposes. The Managed Switch page consists of two sections: Managed Ethernet Switch provides an overview of each individual Ethernet port.
  • Page 169 Mirror Configuration Port mirroring allows monitoring from one port (called mirrored port) to another port (called mirror capture port). This functionality allows any port's Ingress and/or Egress traffic to be monitored to a pre-defined "mirror capture port". Depending on your configuration you can mirror (from mirror port to mirror capture port): The outgoing traffic The incoming traffic...

  • Page 170: Wireless

    Chapter 5 Expert Configuration 5.5.4 Wireless Overview The SpeedTouch™ IEEE802.11g compliant Wireless LAN (WLAN) interface allows you to share its high-speed Internet connection with multiple networking clients in a local network, without needing to (re-)wire your home. The SpeedTouch™ acts as a wireless Access Point (AP), connecting wireless clients and transferring data between them.
  • Page 171 Access point settings This section provides an overview and allows you to configure the basic wireless networking parameters for your SpeedTouch™ wireless access point. Following wireless access point settings can be viewed or configured: Network Name (SSID): The network name, also known as Service Set ID (SSID). For more information, Rate: Displays the current modulation rate in which the SpeedTouch™...
  • Page 172 Chapter 5 Expert Configuration Network Name (SSID) Network Name broadcast Interoperability Mode Channel The WLAN's 'radio' link is a shared medium. As no physical connection exists between the SpeedTouch™ and wireless clients, a name must be given to allow unique identification of your WLAN radio link. This is done by the Network Name, also known as Service Set ID (SSID).
  • Page 173 Enable/disable the To disable your wireless interface: wireless interface Clear wireless interface enabled. Click Apply to immediately apply your changes. To enable the wireless interface: Select Wireless interface enabled. Click Apply to immediately apply your changes. Security The security configuration tab allows you to configure the SpeedTouch™: Security Mode Access Control Security Mode...
  • Page 174 Chapter 5 Expert Configuration WPA-PSK The Wired Equivalent Privacy (WEP) algorithm is used to protect wireless communication from eavesdropping. WEP relies on a secret key that is shared between the wireless client (e.g. a laptop with a wireless ethernet card and the SpeedTouch™. The fixed secret key is used to encrypt packets before they are transmitted.
  • Page 175 Access Control Wireless client access control allows to authorize or explicitly inhibit access between specific wireless clients and the SpeedTouch™ wireless access point based on the wireless client's MAC address. The Access Control tab allows you to manage the SpeedTouch™ Access Control List (ACL).
  • Page 176 Chapter 5 Expert Configuration Associated stations Networks Other Networks The Associated Stations tab allows you to overview the currently associated clients. To add an associated station to the access control list: Select the entry you want to explicitly add to the ACL. Associated stations that are not present in the ACL yet, are identified by the name Not Registered (ACL).

  • Page 177: Firewall

    5.6 Firewall Overview The Firewall menu consists of the following topics: Click ... Expressions Policy E-DOC-CTC-20050429-0104 v1.0 To ... view/configure interface, or IP, or Service related expressions. For more information, see “5.3.2 Expressions” on page 125. view/configure the SpeedTouch™ Stateful Inspection Firewall security level and its policies.

  • Page 178: Policy

    Chapter 5 Expert Configuration 5.6.1 Policy Firewall levels The Level list allows you to choose between the following level: Disabled: All traffic is allowed to pass through your SpeedTouch™. Game and Application sharing is allowed by the firewall. BlockAll: Use this Security Level to block all traffic from and to the Internet. Game and Application sharing is not allowed by the firewall.
  • Page 179 Buttons Click: Customize... to create a new firewall level starting from the selected firewall level. For more information, see Set Active to activate the selected firewall rule. Loose UDP tracking If this check box is: Selected: The source port of the original UDP connection is opened for all hosts which want to connect to this port.
  • Page 180 Chapter 5 Expert Configuration Creating a firewall rule Proceed as follows to create a new security level and to add rules: Select one of the six security levels. Click Customize. Type name and description for the new security level and click Apply. Click New to add a rule.

  • Page 181: Log

    Chapter 5 Expert Configuration 5.6.2 Log Introduction The Log page allows you to view log messages when: a firewall rule is hit. the firewall is enabled or disabled. the firewall level is changed. a firewall rule is created. a firewall rule is modified. a firewall rule is deleted.

  • Page 182: Vpn

    Chapter 5 Expert Configuration 5.7 VPN Availability Overview The VPN feature is only available if you activated the VPN software module. For more information, see “5.2.10 Add-on” on page The VPN menu consists of following items Click ... To ... LAN to LAN connect your LAN with a remote LAN through an IPSec VPN tunnel.

  • Page 183: Lan To Lan

    5.7.1 LAN to LAN Tabs The LAN to LAN page consists of two tabs. Select: Remote Gateway Address Known as the starting page when the SpeedTouch™ must be able to initiate a VPN connection. Remote Gateway Address Unknown as the starting page when the SpeedTouch™...

  • Page 184: Vpn Client

    Chapter 5 Expert Configuration 5.7.2 VPN Client The VPN Client page Configuration procedure The VPN client in the SpeedTouch™ can replace a software VPN client installed on a computer. You can use it for example to connect from your home to your employer’s corporate network for tele-working.

  • Page 185: Vpn Server

    5.7.3 VPN Server The SpeedTouch™ as In a VPN client-server scenario, the VPN server is always the responder in the IKE VPN Server negotiations. Various VPN clients can dial in to a VPN server, since it supports multiple simultaneous VPN connections. A VPN server does not know a priori which remote Security Gateway will attempt to set up a VPN connection.

  • Page 186: Certificates

    Chapter 5 Expert Configuration 5.7.4 Certificates Certificates pages Secure Storage page Request Import page CRL page CEP page The Certificates pages allow you to manage your certificates. This page shows the list of certificates stored in the SpeedTouch™. This page allows importing new certificates from a Certificate Authority into the SpeedTouch™.

  • Page 187: Advanced

    5.7.5 Advanced When to use The Advanced VPN menu gives access to two main pages where the complete IPSec configuration can be done. These pages are component-oriented, as opposed to the application-oriented pages described in “5.7.2 VPN Client” on page 174 oriented means that a number of components are constructed and subsequently combined.

  • Page 188: Debug

    Chapter 5 Expert Configuration 5.7.6 Debug Status page Statistics page Logging page Tear Down All Tunnels This page shows the status of the IKE Security Association (Phase 1) and the IPSec Security Association(s) (Phase 2). For an operational VPN connection, both an IKE Security Association and an IPSec Security Association should be active.

  • Page 189: Sip Pbx

    5.8 SIP PBX Availability The VPN feature is only available if you activated the SIP PBX software module. For more information, see SpeedTouch™ SIP PBX The SpeedTouch™ has a key role in the enhancement of Voice over IP services for corporations, universities or enterprises.
  • Page 190 Chapter 5 Expert Configuration Location Service Call Logging Call Screening The Location Service page allows you to: View the registered users. Add new SIP users. All inbound and outbound SIP sessions that cross the multi-media SIP PBX can be monitored from the SpeedTouch™web interface. Both successful and failed calls will be shown.

  • Page 191: Software Keys

    6 Software Keys Introduction A Software Key is a tool to disclose or activate services or software modules. The following Software modules can be activated: VPN256-32, VPN16-4, VPN16-1: Integrated VPN IPSec capability (SpeedTouch™608 (WL)/620) ISDN: Integrated ISDN Modem full capacity (SpeedTouch™608 WL/620) SIP256: SIP Multi-Media PBX capability (SpeedTouch™620) How to activate a...
  • Page 192 Chapter 6 Software Keys Select the desired software module to open the registration web site on the Internet. Complete the form to request a new software Key. Select the Request Software Key button to proceed. As a result you will get a text box with the key in it. Copy the key and past it into the Software Activation Code Input Display and click the Add button.

  • Page 193: Software Upgrade

    7 Software Upgrade Introduction This chapter describes how to upgrade the SpeedTouch™ system software or firmware. System software For the availability of new system software version packages you can: upgrades availability Click the SpeedTouch Maintenance link, available on the Setup CD menu. Go to the embedded Update page.

  • Page 194: Embedded Update Page

    Chapter 7 Software Upgrade 7.1 Embedded Update Page Introduction Procedure From a remote server This procedure is OS independent and supports roll-back scenarios. Your SpeedTouch™ provides storage room for two system software packages: the active system software the SpeedTouch™ is currently running and a passive package. A switch over from the one package to the other can be performed.
  • Page 195 From a PC You can upgrade your SpeedTouch™ from a PC. To download the latest software version: To upload the software to your SpeedTouch™: To load the new software: At the end of the procedure, the SpeedTouch™ returns to the Home page. E-DOC-CTC-20050429-0104 v1.0 This procedure is done in steps.

  • Page 196: Upgrade Wizard On Setup Cd

    Chapter 7 Software Upgrade 7.2 Upgrade Wizard on Setup CD Introduction Starting the Upgrade Wizard The procedures described in this section are valid only in case: You run an MS Windows Operating System or Mac OS X. Your SpeedTouch™ and computer are properly connected through Ethernet. It is NOT possible to upgrade your SpeedTouch™...
  • Page 197 Upgrade procedure In the Welcome to the SpeedTouch Upgrade Wizard window, click Next. The SpeedTouch™ Software License Agreement window appears. You must accept before continuing. Click Yes to accept. The SpeedTouch™ Upgrade Wizard will search for the SpeedTouch™ on the network.
  • Page 198 Chapter 7 Software Upgrade System software downgrade The following window shows the system software version currently active on the SpeedTouch™ as well as one or more system software versions available on the CD: For more information on a found software version, click Firmware Details. Select the appropriate system software version and click Next.

  • Page 199: Upgrade Via A Bootp/Tftp Server

    7.3 Upgrade via a BOOTP/TFTP Server SpeedTouch™ system The SpeedTouch™ system software is based on BOOTP, a standard mechanism used software management for booting diskless stations. You can force the SpeedTouch™ in BOOTP mode, allowing a BOOTP/TFTP server to manage the SpeedTouch™ file system, and submit upgrade files to it. Important note It is recommended only to use the procedure described below, if you are familiar with the use of a BOOTP server, and the mechanisms on which BOOTP is based.
  • Page 200 Chapter 7 Software Upgrade Procedure To upgrade/restore the SpeedTouch™ system software: In a preliminary step, make sure that a BOOTP server is readily installed on the computer from which you intend to perform the system software upgrade. Configure the BOOTP server to use the SpeedTouch™ system software image file in its reply to BOOTP requests from the SpeedTouch™...

  • Page 201: Troubleshooting

    Chapter 8 Troubleshooting 8 Troubleshooting Introduction This chapter suggest solutions for problems you may encounter while installing or configuring your SpeedTouch™. If the suggestions do not resolve the problem, look at the support pages on http:// www.speedtouch.com/support or contact your service provider. For Internet connection troubleshooting, refer to the provided Installation and Setup Guide.

  • Page 202: General Speedtouch™ Troubleshooting

    Chapter 8 Troubleshooting 8.1 General SpeedTouch™ Troubleshooting SpeedTouch™ does not work SpeedTouch™ unreachable Poor SpeedTouch™ performance If none of the LEDs light up, make sure that: The SpeedTouch™ is plugged into a power socket outlet. You are using the correct power supply for your SpeedTouch™ device, that is 18V AC.

  • Page 203: Wired Ethernet Troubleshooting

    Chapter 8 Troubleshooting 8.1.1 Wired Ethernet Troubleshooting LAN LED does not light Make sure that: The LAN cable is securely connected to the 10/100Base-T port. You are using the correct cable type for your Ethernet equipment, that is UTP CAT5 with RJ-45 connectors. E-DOC-CTC-20050429-0104 v1.0...

  • Page 204: Wireless Ethernet Troubleshooting

    Chapter 8 Troubleshooting 8.1.2 Wireless Ethernet Troubleshooting Not able to connect wireless clients No wireless connectivity Poor wireless connectivity or reach Check following: In case registration is enabled, you must press the 'Association' button to register the wireless client or search for wireless devices via the embedded web pages.

  • Page 205: Upgrade Troubleshooting

    8.1.3 Upgrade Troubleshooting Introduction While upgrading your SpeedTouch™ via the Upgrade Wizard on the web pages or on the Setup CD, you might encounter one of following problems. Upgrade via web pages One of following messages might appear: Update from remote server: Message Failed to retrieve new software version from the support site.
  • Page 206 Chapter 8 Troubleshooting Upgrade via Setup CD If the Upgrade Wizard in step 4, as described in does not find any SpeedTouch™ on the network, an error window will appear, stating your SpeedTouch™ has not been found. In this case check that: The SpeedTouch™...

  • Page 207: Upnp™ On Windows Xp Systems

    8.2 UPnP™ on Windows XP Systems SpeedTouch™ not Check on following: detected by UPnP™ or Make sure the UPnP™ and Internet Gateway Device Control Client Networking IGD Control Client components are added to your MS Windows XP system. Your computer doesn’t support UPnP™ if you run an operating system other than MS Windows XP and MS Windows Millennium.
  • Page 208 Chapter 8 Troubleshooting Adding IGD Discovery and Control Your MS Windows XP system is able to discover and control Internet Gateway Devices (IGD), like the SpeedTouch™ on your local network. Therefore it is recommended to add the IGD Discovery and Control client to your system. Proceed as follows: On the Windows task bar, click Start.

  • Page 209: Reset To Factory Defaults

    8.3 Reset to Factory Defaults Resetting your You might consider a reset to factory defaults as described below. SpeedTouch™ You can choose between: Hardware reset Software reset A reset to factory default settings deletes the configuration profile settings. Therefore, after the reset, a reconfiguration of your SpeedTouch™ will be needed. Also your WLAN clients will have to be re-associated, as described in “2.2.2 Connecting First-time Wireless Clients”...
  • Page 210 Chapter 8 Troubleshooting Software reset Proceed as follows: Go to the SpeedTouch™ web pages. In the menu select SpeedTouch > Configuration. In the Pick a task... list, click Reset my SpeedTouch to default settings. The SpeedTouch™ restarts. The SpeedTouch™ returns to the SpeedTouch™ Home page (unless the IP address of your computer is not in the same subnet as the default IP address of the SpeedTouch™, being 192.168.1.254).
  • Page 212 Need more help? Additional help is available online at www.speedtouch.com...

This manual is also suitable for:

Speedtouch 608Speedtouch 608 wlSpeedtouch 620

Table of Contents