System Settime - THOMSON SpeedTouch 608 Cli Reference Manual

System Commands

system settime

Show/set the SpeedTouch™ internal system clock.
When synchronization with an external NTP server via the SpeedTouch™ SNTP client fails, this command allows to
manually configure its internal clock.
In cases without regular synchronization, accurate real-time clock settings can not be garantueed.
Note
SYNTAX:
system settime
where:
date
time
timezone
daylightsaving
EXAMPLE:
=>system settime
date = 31/01/2005
time = 18:05:16
timezone = +00:00
daylightsaving = off
=>
RELATED COMMANDS:
sntp config
450
[date = <dd/mm/yyyy>]
[time = <hh:mm:ss>]
[timezone = <(+ or -)hh:mm>]
[daylightsaving = <{no|yes}>]
The system date formatted as dd/mm/yyyy.
If not specified, the current date is preserved.
The system time formatted as hh:mm:ss.
If not specified, the current time is preserved.
The system timezone formatted as (+ or -)hh:mm.
Valid timezones are possible from -12:00 to +14:00 with a
resolution of 15 minutes.
If not specified, the current timezone is preserved.
Enable (yes) or disable (no) daylight saving.
The default is yes.
If not specified, the current daylight saving setting is preserved.
Show/set SpeedTouch™ SNTP client configuration.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0