Ipsec Module - THOMSON SpeedTouch 608 Cli Reference Manual

IPSec Module

Facility Severity
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER NOTICE
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER INFO
USER NOTICE
E-DOC-CTC-20040216-0002 v1.0
Contents
AddSa: SPIs:<spi/otherspi> Loc:<myid> Rem:<hisid> (<ip-address>)
Prot:<prot>-<alg><keysize> Exp:<expiry>
AddSuite: SPIs:<spi/otherspi> Loc:<myid> Rem:<hisid> (<ip-address>)
Prot:<prot>-<alg><keysize> Exp:<expiry>
Cert/map id mismatch: <hisid> using <dn>
Cert: <hisid> using <dn> to establish to <myid>
"Cert status unknown; no ISAKMP <to/from> <ip-address>"
"Cert not usable; no ISAKMP <to/from> <ip-address>"
DelSa: SPIs:<spi/otherspi>
DelSuite: SPIs:<spi/otherspi>
DelPhase1: Rem:<ip-address> ID: <hisid> Cookies: <cookies> <cause>
Establish Request: <ip-address> to <ip-address>
Secure map contains target <ip-address> for this gate but no red security policy
entry for these nodes
AddPhase1: Rem:<ip-address>, ID: <hisid>, Cookies: <cookies>
Prot:<alg[keysize]>, Exp:<expiry>
No local policy matches <myid>
Notify from <ip-address>: <notify-string>
Notify to <ip-address>: <notify-string>
Rekey Phase 2: Loc:<myid>, Rem:<hisid> (<ip-address>)
Got policy for peer:<ip-address>, I am <initiator/responder>,
authentication: certificate
Got policy for peer:<ip-address>, I am <initiator/responder>,
authentication: certificate or shared
Got policy for peer:<ip-address>, I am <initiator/responder>,
authentication: shared
Shared secret lookup failed for <id><to/from><ip-address>
Syslog Messages
475