Ip Rtadd - THOMSON SpeedTouch 608 Cli Reference Manual

ip rtadd

Add a route to the SpeedTouch™ routing table.
SYNTAX:
ip rtadd
where:
dst
dstmsk
label
gateway
intf
metric
EXAMPLE:
=>ip rtlist
Destination Label
10.0.0.0/24
10.0.0.140/32
127.0.0.1/32
=>ip rtadd dst=10.10.0.0/24 src=10.0.0.0/24 gateway=10.0.0.140
=>ip rtlist
Destination Label
10.0.0.0/24
10.10.0.0/24
10.0.0.140/32
127.0.0.1/32
=>
RELATED COMMANDS:
ip rtdelete
ip rtlist
E-DOC-CTC-20040216-0002 v1.0
dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <string>]
[gateway = <ip-address>]
[intf = <interface name>]
[metric = <number{0-100}>]
The destination IP address(es) for this route.
Supports cidr notation.
The destination IP address mask.
The name of the label.
The IP address of the next hop. Must be directly connected.
The parameters gateway and intf are mutually exclusive.
Note
Only for special interface routes: the outgoing IP interface name.
The parameters gateway and intf are mutually exclusive.
Note
The metric for this route (weight factor).
Gateway
10.0.0.140
10.0.0.140
127.0.0.1
Gateway
10.0.0.140
10.0.0.140
10.0.0.140
127.0.0.1
Remove a route from the routing table.
Show current routing table.
Intf Mtrc Status
eth0 0 [UP]
eth0 0 [UP]
loop 0 [UP]
Intf Mtrc Status
eth0 0 [UP]
eth0 0 [UP]
eth0 0 [UP]
loop 0 [UP]
IP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
211