Pptp Profadd - THOMSON SpeedTouch 608 Cli Reference Manual

pptp profadd

Define a new PPTP profile.
SYNTAX:
pptp profadd
where:
name
qos
encaps
ac
E-DOC-CTC-20040216-0002 v1.0
name = <string>
[qos = <string>]
[encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]
The name for the PPTP profile.
The name of the qosbook entry, containing the settings for this profile.
This parameter never needs to be specified.
The type of WAN encapsulation applicable to PPTP interfaces using this
PPTP profile.
Choose between:
•
vcmux
•
nlpid - Network Layer Protocol IDentifiers (NLPID).
The High-level Data Link Control (HDLC) framing option applicable to
PPTP interfaces using this PPTP profile.
Choose between:
•
always:
Before relaying the encapsulated PPP frames over the PPPoA link,
make sure that the address and control field (0xFF03) is always in
front of the frames.
•
never:
Before relaying the encapsulated PPP frames over the PPPoA link,
make sure the address and control field will never be found in front
of the frames.
•
keep:
Do not change the frames arriving via the PPTP tunnel.
The default is never (compliant to RFC2364).
It is recommended to keep this setting.
Note
PPTP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
397