Ethoa Ifattach - THOMSON SpeedTouch 608 Cli Reference Manual

ETHoA Commands

ethoa ifattach

Attach (i.e. connect) an ETHoA interface.
SYNTAX:
ethoa ifattach
where:
intf
EXAMPLE:
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
Moreethoa : dest : Br4
Retry : 10
Connection State : not-connected
=>ethoa ifattach intf=Moreethoa
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
Moreethoa : dest : Br4
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
=>
RELATED COMMANDS:
ethoa ifadd
ethoa ifconfig
ethoa ifdelete
ethoa ifdetach
ethoa iflist
162
intf = <intfname>
The name of the ETHoA interface to attach.
QoS : default
frames: 0
frames: 0
QoS : default
QoS : default
frames: 0
frames: 0
QoS : default
frames: 0
frames: 0
Create a new ETHoA interface.
Configure an ETHoA interface.
Delete an ETHoA interface.
Detach an ETHoA interface.
Show current ETHoA interfaces.
Encaps : llc/snap
dropframes: 0
Encaps : llc/snap
Encaps : llc/snap
dropframes: 0
Encaps : llc/snap
dropframes: 0
REQUIRED
Fcs : off
Fcs : off
Fcs : off
Fcs : off
E-DOC-CTC-20040216-0002 v1.0