Switch Commands
switch mirror egress
Enable or disable the specified port to be the Mirror Egress Port.
Only one port can be the Mirror Egress Port at any one time.
Note
But a port can be the Mirror Egress Port and the Mirror Ingress Port at the same time.
SYNTAX:
switch mirror egress
where:
port
state
EXAMPLE:
Here port 1 is enabled as Mirror Egress Port
=>switch mirror egress port=1
=>switch mirror egress
Egress mirror port = 1
Here port 1 is disabled as Mirror Egress Port
=>switch mirror egress
Egress mirror port = 1
=>switch mirror egress port=1 state=disabled
=>switch mirror egress
=>
RELATED COMMANDS:
switch mirror capture
switch mirror ingress
440
port = <number{1-4}>
[state = <{enabled|disabled}>]
The port to be the Mirror Egress Port.
If no port number is specified, then the port number of the current
Mirror Egress Port is shown.
This parameter permits to enable/disable a port as Mirror Egress
Port.
Define the specified port to be the Mirror Capture Port.
Enable or disable the specified port to be a Received Port Mirroring.
REQUIRED
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0