Nat Applist - THOMSON SpeedTouch 608 Cli Reference Manual

NAT Commands

nat applist

List available Network Address Translation / Port Address Translation (NAT/PAT) protocol helpers.
Certain protocols are 'sensitive' to NAT/PAT in that they do not function properly when dealing with it. This list shows
which 'NAT/PAT-sensitive' applications are supported on the SpeedTouch™, i.e. the inherent knowledge of the
SpeedTouch™ on this matter.
SYNTAX:
nat applist
EXAMPLE:
=>nat applist
Application Proto DefaultPort
IP6TO4 6to4
GRE gre
PPTP tcp
ESP esp
IKE udp
SIP udp
JABBER tcp
ILS tcp
H245 tcp
H323 tcp
RAUDIO(PNA) tcp
RTSP tcp
IRC tcp
FTP tcp
=>
RELATED COMMANDS:
nat bind
nat bindlist
nat unbind
328
1 OUTGOING
1 INCOMING
1723 OUTGOING INCOMING
1 OUTGOING INCOMING
500 OUTGOING INCOMING
5060 OUTGOING INCOMING
15222 OUTGOING
0 OUTGOING
0 OUTGOING INCOMING
1720 OUTGOING INCOMING
7070 OUTGOING
554 OUTGOING
6667 OUTGOING
21 OUTGOING INCOMING
Create a new helper/port binding.
List current NAT/PAT helper/port bindings.
Delete an existing helper/port binding.
E-DOC-CTC-20040216-0002 v1.0