Sntp List - THOMSON SpeedTouch 608 Cli Reference Manual

SNTP Commands

sntp list

Show a listing of added NTP servers and their current status.
SYNTAX:
sntp list
EXAMPLE:
=>sntp list
IP Address Version
100.101.110.111
100.101.110.112
100.101.110.113
=>
DESCRIPTION:
Following NTP server states are possible:
Not used
Contacting ...
Unable to contact
Synchronized
RELATED COMMANDS:
sntp add
sntp del
426
Status
4 contacting ...
4 Unable to contact
4 Synchronized
The SpeedTouch™ SNTP client is disabled. As a consequence, none of the
NTP servers are used.
The SpeedTouch™ SNTP client is trying to contact this NTP server.
The SpeedTouch™ SNTP client is unable to contact this NTP server; it may be
down, or no end-to-end connectivity exists (no connection, no DSL, ...).
The SpeedTouch™ SNTP client was able to contact this NTP server. If
required the internal clock has been synchronized with this NTP server.
Add a Network Time Protocol (NTP) server to the NTP server list to
synchronize the internal SpeedTouch™ real time clock (SNTP client) with.
Remove an NTP server from the NTP server list.
E-DOC-CTC-20040216-0002 v1.0