Nat Defserver - THOMSON SpeedTouch 608 Cli Reference Manual

nat defserver

Define the default server behind the SpeedTouch™ NAT/PAT device that receives all (unknown) incoming packets.
In typical LAN configurations, one local 'default' server will be responsible for all WAN-LAN mail, http, ftp, ... connec-
tivity. This command allows to specify this server. For specific services, use nat create.
SYNTAX:
nat defserver
where:
addr
EXAMPLE INPUT/OUTPUT:
=>nat defserver
Default server is undefined
=>nat defserver addr=10.0.0.1
=>nat defserver
Default server is 10.0.0.1
=>
E-DOC-CTC-20040216-0002 v1.0
[addr = <ip-address>]
The IP address of the server (on the 'inside') that will receive all
(unknown) incoming packets.
If not specified, the current default server is shown.
Note
NAT Commands
OPTIONAL
335