Ipsec Connection Start - THOMSON SpeedTouch 608 Cli Reference Manual

ipsec connection start

Manually start the negotiation of a VPN connection.
Before being able to start a connection, the VPN connection profile has to be added via the command ipsec connection
add and configured via the command ipsec connection config.
SYNTAX:
ipsec connection start
where:
conn
RELATED COMMANDS:
ipsec connection config
ipsec connection list
ipsec connection stop
E-DOC-CTC-20040216-0002 v1.0
conn = <string>
The name of the VPN connection profile to start negotiation for.
Use the command ipsec connection list for a list of
Note
available VPN connection profiles.
Configure a VPN connection profile.
Show a listing of VPN connection profiles.
Stop a VPN connection.
IPSec Commands
REQUIRED
273