Bridge Config - THOMSON SpeedTouch 608 Cli Reference Manual

Bridge Commands

bridge config

Show/set bridge ageing policy for dynamically learned Medium Access Control (MAC) addresses.
SYNTAX:
bridge config
where:
age
filter
EXAMPLE:
=>bridge config
Ageing : 300
Filter : no_WAN_broadcast
=>bridge config age=600
=>bridge config
Ageing : 600
Filter : no_WAN_broadcast
=>
RELATED COMMANDS:
bridge ifadd
bridge ifattach
bridge ifdelete
bridge ifdetach
bridge iflist
52
[age = <number {10 - 100000}>]
[filter = <{no_WAN_broadcast|PPPoE_only|none}>]
A number between 10 and 100000 (seconds).
Represents the lifetime of a dynamically learned MAC address.
The default is 300.
The bridge filter to be applied for all WAN bridge ports.
Choose between:
•
no_WAN_broadcast:
broadcasts from the SpeedTouch™ itself to the WAN are
filtered out, broadcasts from the LAN to the WAN are still
passed through.
•
PPPoE_only:
only PPPoE broadcasts are passed through, all others are
filtered out
•
none:
no broadcasts are filtered out.
The default is no_WAN_broadcast.
Create a bridged Ethernet interface.
Attach a bridge interface.
Delete a bridge interface.
Detach a bridge interface.
Show current bridge configuration.
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0