Service Template Files And The Cli - THOMSON SpeedTouch 608 Cli Reference Manual

Service Template Files and the CLI

Service Template Files
The Service Template files, used by the Setup wizard, or directly uploaded via the SpeedTouch™ web pages, consist of
a set of CLI commands. Only CLI commands, which are part of the SpeedTouch™ CLI command set, may be used in
the .ini and .def files.
For readability, Service Template files are partitioned in paragraphs. These paragraphs reflect a CLI command group
selection in the SpeedTouch™ CLI. However, due to internal processing, not all paragraph names are the same as their
corresponding CLI command group selection.
The table below shows the relationship between the [<configuration>.ini] paragraphs and the available
SpeedTouch™ CLI commands:
[<configuration>.ini] paragraphs
[adslisdn.ini]
[adslpots.ini]
[autoip.ini]
[autopvc.ini]
[bridge.ini]
[cip.ini]
[dhcc.ini]
[dhcp.ini]
[dhcr.ini]
[diagnostics.ini]
[dnsc.ini] and [dnsd.ini]
[env.ini]
[eth.ini]
[ethoa.ini]
[ip.ini]
[ipoa.ini]
[ipqos.ini]
[ipsec.ini]
[label.ini]
[language.ini]
[nat.ini]
[oam.ini]
E-DOC-CTC-20040216-0002 v1.0
Available SpeedTouch™ CLI commands
The adsl CLI command group (only for a ADSL/ISDN variant)
The adsl CLI command group(only for a ADSL/POTS variant)
The ip auto CLI command subgroup
The autopvc CLI command subgroup
The bridge CLI command group
The cip CLI command group
The dhcp client CLI command subgroup
The dhcp server CLI command subgroup
The dhcp relay CLI command subgroup
The ip ping CLI command
The dns CLI command group
The env CLI command group
The eth CLI command group
The ethoa CLI command group
The ip CLI command group
The cip CLI command group
The ipqos CLI command group
The ipsec, ipsec cert, ipsec connections, ipsec descriptor, and ipsec peer
CLI command subgroups.
The label CLI command group
The language CLI command group
The nat CLI command group
The atm oam CLI command subgroup
CLI Navigation
31