Dhcp Server Lease Add - THOMSON SpeedTouch 608 Cli Reference Manual

dhcp server lease add

Assign a DHCP server lease to a DHCP host in the local network.
SYNTAX:
dhcp server lease add
where:
clientid
pool
addr
offset
leasetime
hostname
E-DOC-CTC-20040216-0002 v1.0
clientid = <client-id>
pool = <string>
[addr = <ip-address>]
[offset = <number>]
[leasetime = <number>]
[hostname = <{hostname|""}>]
The DHCP client identification string of the booting host.
The name of the DHCP server pool from which the DHCP lease
should be taken.
Use the command dhcp server pool list for a list of available
Note
DHCP server pools.
The favoured IP address for this DHCP host. This IP address, if
specified, must be in the range of the DHCP server pool specified.
A number between 0 and the integer number defined by the number
of available IP addresses in the DHCP server pool.
Represents the IP address offset in the DHCP server pool preserved
for this host.
Not specifying this parameter does not preserve an IP address for
the host.
A number between 0 and 1814400 (seconds).
Represents the time the host is allowed to use this address, before
renewing.
Specifying -1 makes the lease permanent.
Note
The hostname to add to the local Domain Name System (DNS) table
for this host. Use "" if no hostname is associated with this lease.
DHCP Commands
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
113