Pppoa Ifconfig - THOMSON SpeedTouch 608 Cli Reference Manual

PPPoA Commands

pppoa ifconfig

Configure a PPPoA interface.
The interface to be configured may not be connected at the time of configuration.
Note
Use the command pppoa ifdetach prior to using the command pppoa ifconfig.
SYNTAX:
pppoa ifconfig
where:
intf
dest
user
password
qos
360
intf = <intfname>
[dest = <phonebook entry>]
[user = <string>]
[password = <password>]
[qos = <{default}>]
[encaps = <{vcmux|llc}>]
[pcomp = <{off|on}>]
[accomp = <{on|off|negotiate}>]
[trace = <{off|on}>]
[auth = <{pap|chap|auto}>]
[restart = <{off|on}>]
[retryinterval = <number{0-65535}>]
[passive = <{off|on}>]
[silent = <{off|on}>]
[echo = <{off|on}>]
[mru = <number{293-8192}>]
[laddr = <ip-address>]
[raddr = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[format = <{cidr|dotted|none}>]
[pool = <{none}>]
[savepwd = <{off|on}>]
[demanddial = <{off|on}>]
[primdns = <ip-address>]
[secdns = <ip-address>]
[dnsmetric = <number{0-100}>]
[idle = <number{0-1000000}>]
[idletrigger = <{RxTx|Rx|Tx}>]
[addrtrans = <{none|pat}>]
[unnumbered = <{off|on}>]
The name of the PPPoA interface to be configured.
The destination for this PPPoA interface. Typically, a phonebook entry.
The user name for remote PAP/CHAP authentication.
The password for remote PAP/CHAP authentication.
The name of a qosbook entry defining the QoS parameters for the WAN
link.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0