THOMSON SpeedTouch 608 Cli Reference Manual page 32

CLI Navigation
Fill in the parameter value and press ENTER:
3
Use the ARROW keys to scroll to the next parameter:
4
When all the necessary parameters have been entered, use the TAB key to go to the OK field and press ENTER.
5
Do not forget to save your changes by executing saveall (from any CLI prompt).
Note
Preset parameter values
In case preset values are provided for a parameter, they are shown at the bottom of the menu.
You can scroll through these preset values with the ARROW keys or enter the value manually.
30
E-DOC-CTC-20040216-0002 v1.0