Atm Oam Ccsend - THOMSON SpeedTouch 608 Cli Reference Manual

ATM Commands

atm oam ccsend

Send CC activate/deactivate to connection.
SYNTAX:
atm oam ccsend
where:
port
vpi
vci
span
action
direction
RELATED COMMANDS:
atm oam ccconfig
atm oam cclist
42
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[span = <{segment|end2end}>]
[action = <{activate|deactivate}>]
[direction = <{source|sink|both}>]
The ATM port number.
Choose between:
•
DSL0
•
DSL1
•
ATM2
•
ATM3
•
AAL5
•
ATM5.
Or specify a port number (dsl0 has port number 0, ..., atm5 has port
number 5).
A number between 0 and 15.
Represents the Virtual Path Identifier (VPI).
A number between 0 and 511.
Represents the Virtual Channel identifier (VCI).
For a VP cross-connection, use VCI=0 or do not specify.
End2end or segment continuity check.
Enable or disable CC.
The default is disabled.
Indicates the direction of CC activity. Select either:
•
source
•
sink
•
both.
If not specified, CC is activated/deactivated for both directions.
Configure CC on the connection.
Show current CCconfiguration.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0