THOMSON SpeedTouch 608 Cli Reference Manual page 97

EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT:
The SpeedTouch™ is configured as DHCP client on its Ethernet interface eth0.
=>dhcp client iflist
eth0 : [BOUND]
flags=
IP address
HW address
DHCP server
lease renewal in
lease rebinding in
lease expires in
Number of leases: 1
Total size of table: 18,
=>dhcp client stats
DHCP client statistics:
Corrupted packet recv
DECLINEs sent
RELEASEs sent
INFORMs sent
Number of dynamic interfaces:
Memory usage:
Table size of dyn leases: 19,
=>dhcp client ifrelease intf=eth0
=>(CTRL + Q)
=>STATE ACTIVATE !
STATE IDLE !
STATE ACTIVATE !
dhcc: intf 1 releases 10.0.0.3 to server 10.10.1.1.
dhcc: 10.0.0.3 deleted: ok.
STATE IDLE !
STATE ACTIVATE !
.............
dhcc: intf 1 in init state.
n_send() broadcast triggered; To be verified
dhcc: broadcast discover on intf 1.
=>(CTRL + S)
=>dhcp client stats
DHCP client statistics:
Corrupted packet recv
DECLINEs sent
RELEASEs sent
INFORMs sent
Number of dynamic interfaces:
Memory usage:
Table size of dyn leases: 19,
=>
RELATED COMMANDS:
dhcp client ifattach
dhcp client ifconfig
dhcp client ifdelete
E-DOC-CTC-20040216-0002 v1.0
uc
: 10.0.0.3
: 00:90:d0:01:47:f1
: 10.10.1.1
5 days, 58 min, 45 sec
8 days, 20 h, 6
10 days, 2
in use: 1, free: 94 %
: 0
: 0
: 0
: 0
1
in use: 1,
: 0
: 0
: 1
: 0
1
in use: 1,
Attach a DHCP lease to an interface.
Configure a DHCP lease created for a specific interface.
Delete a dynamic interface.
min, 18 sec
h, 28 min, 48 sec
free: 94 %
free: 94 %
DHCP Commands
95