Ip Config - THOMSON SpeedTouch 608 Cli Reference Manual

ip config

Show/set global IP stack configuration options.
SYNTAX:
ip config
where:
forwarding
firewalling
redirects
sourcerouting
netbroadcasts
ttl
E-DOC-CTC-20040216-0002 v1.0
[forwarding = <{off|on}>]
[firewalling = <{off|on}>]
[redirects = <{off|on}>]
[sourcerouting = <{off|on}>]
[netbroadcasts = <{off|on}>]
[ttl = <number{0-255}>]
[fraglimit = <number{1-1024}>]
[defragmode = <{normal|always|nat}>]
[addrcheck = <{off|own|static|dynamic}>]
[mssclamping = <{off|on}>]
Disable (off) or enable (on) the IP routing functionality.
Enable (on) or disable (off) IP firewalling (master switch).
If applicable, the CLI firewall level allows configuration of the
SpeedTouch™ firewall.
The default is on (for security reasons).
It is strongly recommended never to disable the
Note
SpeedTouch™ firewall.
Disable (off) or enable (on) the sending of ICMP redirect messages.
A router can send a redirect message in case a shorter path than
the path followed is discovered.
The default is off (for security reasons).
Disallow (off) or allow (on) IP source routed packets.
IP source routed packets are packets with the route to follow
specified in the header.
The default is off (for security reasons).
Disallow (off) or allow (on) net directed broadcasts.
The default is off.
In case netbroadcasts are allowed, no traces of netbroadcasts are
generated.
A number between 0 and 255.
Represents the default Time To Live (TTL) for locally generated IP
packets. This parameter determines the number of hop-counts the
IP packet may pass before it is dropped.
Generally, the time-to-live is 64 hop-counts.
By limiting the time-to-live, continuous circulation of IP packets on
the network without ever reaching a destination is avoided.
IP Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
199