Dhcp Relay Config - THOMSON SpeedTouch 608 Cli Reference Manual

DHCP Commands

dhcp relay config

Set the relay configuration settings.
SYNTAX:
dhcp server config
where:
agentinfo
agentmismatch
trace
EXAMPLE:
=>dhcp relay config
Agent info status : off
Drop agent info mismatch status : off
Verbose console logging : off
=>dhcp relay config agentinfo=on
=>dhcp relay config
Agent info status : on
Drop agent info mismatch status : off
Verbose console logging : off
=>
RELATED COMMANDS:
dhcp relay add
dhcp relay delete
100
[agentinfo = <{off|on}>]
[agentmismatch = <{off|on}>]
[trace = <{off|on}>]
Sets the relay agent info status (RFC3046) off or on.
The default is off.
Forward/Drop DHCP reply packet when a relay agent info mismatch
is detected (RFC3046) (on) or not (off).
The default is off.
Disable verbose console logging and generation of debug traces (off)
or enable verbose console logging and generation of debug traces
(on).
The default is off.
Add a DHCP server to the DHCP server list.
Delete a DHCP server from the DHCP server list.
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0