The :Config Cli Command Group - THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual

4.3 The :Config CLI Command Group

Introduction
:config CLI commands
E-DOC-CTC-20051017-0155 v1.0
The config CLI command group allows the management of SpeedTouch™
configurations.
Following CLI commands are available in the config CLI command group:
=>:help config
Following commands are available :
save : Store current configuration to backup file
load : Load saved or default configuration.
delete : Delete a user configuration file.
flush : Flush the loaded configuration.
list : Show the current configuration set
dump : Show the saved configuration file
=>
Below the CLI commands available for SpeedTouch™ configurations are shortly
described. For more information, see the "SpeedTouch™ CLI Reference Guide".
:config save
Allows to save the current configuration of the SpeedTouch™ to a user.ini file
in the '/dl' subdirectory
:config backup filename = <user configuration filename>
Allows to save the current configuration of the SpeedTouch™ to a
configuration file in the '/dl' subdirectory. You are able to choose a filename of
your own choice for the backup file.
:config dump
Allows to view a dump of the stored user.ini file.
SpeedTouch™ Configuration Management
Chapter 4
31