System Clearpassword - THOMSON SpeedTouch 608 Cli Reference Manual

System Commands

system clearpassword

Clear current SpeedTouch™ system password.
To avoid unrestricted and unauthorized access to the SpeedTouch™, it is highly recommended to make sure
Note
the SpeedTouch™ is protected by a system password (can be set via the command system setpassword) and
to change the password on a regular basis.
SYNTAX:
system clearpassword
EXAMPLE:
=>system clearpassword
Security notification: Password changed, use 'saveall' to make it permanent.
=>
RELATED COMMANDS:
system setpassword
444
Set/change current system password.
E-DOC-CTC-20040216-0002 v1.0