THOMSON SpeedTouch 608 Cli Reference Manual page 25

The Help Command
Execute help or ? from top level to list all available commands and command groups for the SpeedTouch™.
Example for the SpeedTouch™608:
=>?
Following commands are available :
help : Displays this help information
menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
Following command groups are available :
adsl atm
config dhcp
ethoa firewall
ipsec label
pppoa pppoe
snmp sntp
td upnp
=>
You can execute the help or ? command from each command group selection. This results in a list of the available
commands (and nested command groups, if available) in this particular command group.
Example:
=>firewall
[firewall]=>
[firewall]=>?
Following commands are available :
tron : Enables verbose console messaging.
troff : Disables verbose console messaging.
match : Defines an ip packet match.
assign : Assign a chain to an entry point.
list : Shows a list of all the hooks with the chain attached.
flush : Clears all hooks. If a hook is provided, that hook is cleared.
Following command groups are available :
chain rule
[firewall]=>
E-DOC-CTC-20040216-0002 v1.0
autopvc bridge
dns env
ip ipoa
language nat
pptp qosbook
software system
cip
eth
ipqos
phonebook
script
systemlog
CLI Navigation
23