Label Rule Create - THOMSON SpeedTouch 608 Cli Reference Manual

Label Commands

label rule create

Create a rule.
If a value is preceded by a "!", it means "NOT".
Note
E.g. "srcintfgrp=!wan" means "if srcintfgrp is different from WAN".
SYNTAX:
label rule create
where:
chain
index
srcintf
srcintfgrp
src
dst
tos
precedence
dscp
316
chain = <string>
[index = <number>]
[srcintf [!]= <string>]
[srcintfgrp [!]= <{wan|local|lan} or number>]
[src [!]= <ip-range>]
[dst [!]= <ip-address>]
[tos [!]= <number{0-255}>]
[precedence [!]= <number{0-7}>]
[dscp [!]= <number{0-63}>]
[prot = <{<supported IP protocol name>|<number>}>]
[srcport [!]= <{<supported TCP/UDP port name>|<number>}>]
[srcportend = <{<supported TCP/UDP port name>|<number>}>]
[dstport [!]= <{<supported TCP/UDP port name>|<number>}>]
[dstportend = <{<supported TCP/UDP port name>|<number>}>]
[clink = <string>]
[log = <{no|yes}>]
label = <{None|link|<string>}>
The name of the chain in which the rule must be inserted.
The number of the rule before which the new rule must be added.
The name of the interface the packet should arrive on to make this
rule apply.
The interface group the packet should arrive on.
The source IP address (range) the packet should come from.
(Supports ip/mask notation).
The destination IP address (range) the packet should be going to.
(Supports ip/mask notation).
A number between 0 and 255.
Represents the Type Of Service specification which should be
expected in the IP packet. The Type of Service numbering
specification is in accordance to the latest version of RFC1700:
Assigned numbers.
A number between 0 and 7.
Represents the precedence in the IP packet (is part of tos).
A number between 0 and 63.
Represents the DSCP in the IP packet (part of tos).
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0