System Config - THOMSON SpeedTouch 608 Cli Reference Manual

system config

Show/set SpeedTouch™ system configuration parameters.
For a good operation of UPnP™ and the discovery mechanism, it is highly recommended not to change the
Note
system config settings.
SYNTAX:
system config
where:
upnp
mdap
drst
led
digestauth
strictusername
dcache
EXAMPLE:
=>system config
upnp discovery
mdap discovery
drst support
digest authentication : disabled
strict username
dcache
led
=>
E-DOC-CTC-20040216-0002 v1.0
[upnp = <{disabled|enabled}>]
[mdap = <{disabled|enabled}>]
[drst = <{disabled|enabled}>]
[digestauth = <{disabled|enabled}>]
[strictusername = <{disabled|enabled}>]
Enable or disable UPnP™ discovery. The default is enabled.
Enable or disable proprietary discovery protocol.
The default is enabled.
Enable or disable DrSpeedTouch access. The default is enabled.
Set the SpeedTouch™ system LED color. Choose between:
•
green: solid green
•
red: solid red
•
orange: solid orange
•
flash: toggle between green and orange
•
off: LED is off.
The default is green.
Enable or disable HTTP digest authentication. The default is disabled.
Enable or disable strict username check. The default is disabled.
Enable or disable data cache. The default is enabled.
For internal use only. Do NOT alter in any way.
Note
: enabled
: enabled
: enabled
: disabled
: enabled
: green
System Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
445