Cip Ifadd - THOMSON SpeedTouch 608 Cli Reference Manual

cip ifadd

Create a Classical IP oA interface at the local side of the Logical IP Subnet (LIS).
SYNTAX:
cip ifadd
where:
addr
netmask
uniaddr
EXAMPLE:
=>cip iflist
cip1 addr = 172.16.0.5
UNI address = A0:*.04
inarp_reqs_in
inarp_reqs_out =
=>cip ifadd addr=172.16.1.1 netmask=255.255.255.0
=>cip iflist
cip1 addr = 172.16.0.5
UNI address = A0:*.04
inarp_reqs_in
inarp_reqs_out =
cip0 addr = 172.16.1.1
UNI address = A0:*.03
inarp_reqs_in
inarp_reqs_out =
=>
RELATED COMMANDS:
cip ifdelete
cip iflist
E-DOC-CTC-20040216-0002 v1.0
addr = <ip-address>
[netmask = <ip-mask (dotted or cidr)>]
[uniaddr = <portspec:address[.selector]>]
The Classical IP oA interface's local IP address in the LIS.
The LIS's subnetmask.
The UNI-address/port specification for incoming connections, e.g.
'A0:*.03': ADSL port, any address, selector 3.
This parameter is only applicable in an Switched Virtual
Note
Channel (SVC) environment.
In most cases, the Classical IP oA LIS is built in a
Permanent Virtual Channel (PVC) environment.
mask = 255.255.255.0
= 0 inarp_repl_in
0 inarp_repl_out =
mask = 255.255.255.0
= 0 inarp_repl_in
0 inarp_repl_out =
mask = 255.255.255.0
= 0 inarp_repl_in
0 inarp_repl_out =
Delete a Classical IP oA interface.
Show current Classical IP oA configuration.
= 0 inarp_inv_in
0 inarp_inv_out =
= 0 inarp_inv_in
0 inarp_inv_out =
= 0 inarp_inv_in
0 inarp_inv_out =
CIP Commands
REQUIRED
OPTIONAL
OPTIONAL
= 0
0
= 0
0
= 0
0
67