Ethoa Ifconfig - THOMSON SpeedTouch 608 Cli Reference Manual

ethoa ifconfig

Configure an ETHoA interface.
SYNTAX:
ethoa ifconfig
where:
intf
dest
qos
encaps
retry
EXAMPLE:
=>ethoa iflist
Moreethoa : dest : Br4
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
=>ethoa ifconfig intf=Moreethoa encaps=llc/snap retry=15
=>ethoa iflist
Moreethoa : dest : Br4
Retry : 15
Connection State : connected
RX bytes: 0
TX bytes: 0
=>
E-DOC-CTC-20040216-0002 v1.0
intf = <intfname>
[dest = <intfname>]
[qos = <string>]
[encaps = <{llc/snap|vcmux}>]
[retry = <number {0-65535}>]
The name of the ETHoA interface to be configured.
The destination for this interface. Typically a phonebook entry.
This parameter needs only to be specified in case of an interface created
without specified destination.
The name of a qosbook entry defining the QoS parameters for the WAN
link.
The type of encapsulation to be used for this ETHoA interface.
Choose between:
•
llc/snap
•
vcmux.
A number between 0 and 65535.
Represents the number of WAN connection setup retries before giving
up.
The default is 10.
QoS : default
frames: 0
frames: 0
QoS : default
frames: 0
frames: 0
Encaps : vcmux Fcs : off
dropframes: 0
Encaps : llc/snap Fcs : off
dropframes: 0
ETHoA Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
163