Systemlog Show - THOMSON SpeedTouch 608 Cli Reference Manual

systemlog show

Show syslog messages in the internal SpeedTouch™ Syslog message buffer.
SYNTAX:
systemlog show
where:
fac
sev
hist
E-DOC-CTC-20040216-0002 v1.0
[fac = <supported facility name>]
[sev = <supported severity name>]
[hist = <{no|yes}>]
Optionally, Specify the facility name of the syslog messages to show.
Use one of the supported facility names (See
Facilities" on page 484 for a listing of syslog facility names supported
by the SpeedTouch™).
If not specified, the messages of all the facilities will be shown.
Specify the lowest priority severity of the syslog messages to show.
Specifying a severity actually means specifying to show the syslog
messages with a severity as specified, and all messages with a higher
severity.
Use one of the supported severity names (See
Severities" on page 485 for a listing of syslog facility names
supported by the SpeedTouch™).
If not specified, the messages of all the facilities will be shown.
Show messages over several SpeedTouch™ reboots (yes) or show
only messages since latest startup (no).
If not specified, only the recent messages will be shown.
Systemlog Commands
" Supported Syslog
" Supported Syslog
OPTIONAL
OPTIONAL
OPTIONAL
455