THOMSON SpeedTouch 608 Cli Reference Manual page 122

DHCP Commands
server
primdns
secdns
dnsmetric
primwins
secwins
leasetime
unnumbered
localgw
EXAMPLE:
=>dhcp server pool list
Pool Start
0 LAN_Private 10.0.0.1
=>dhcp server pool config name=My_Pool poolstart=192.6.11.101 |
poolend=192.6.11.254 netmask=255.255.255 gateway=192.6.11.100 leasetime=21600
=>dhcp server pool list
Pool Start
0 LAN_Private 10.0.0.1
1 My_Pool 192.6.11.101
=>
RELATED COMMANDS:
dhcp server pool list
120
The IP address of the DHCP server for DHCP clients.
The IP address of the primary DNS server for the DHCP clients.
Default value of this parameter is 0 (not specified), which means that
the IP address of the DNS server will be communicated by the
remote server as soon as the PPP IPCP subnetmasking connection is
established or that the SpeedTouch™ acts as the LAN DNS server.
The IP address of the optional secondary DNS server for DHCP
clients.
Default value of this parameter is 0 (not specified), which means that
the gateway IP address will be communicated by the remote server
as soon as the PPP IPCP subnetmasking connection is established.
The DHCP server pool DNS route metric.
The IP address of the primary WINS server for DHCP clients.
The IP address of the secondary WINS server for DHCP clients.
A number between 0 and 1814400 (seconds).
Represents the time for which a client can use its dynamically
allocated IP address.
The default is 7200.
Specifying -1 makes the lease permanent.
Note
Assign an IP address from this pool to the DHCP server or not
(dynamic pools only).
Proxy for a virtual default gateway residing in same subnet of DHCP
client instead of the remote peer address.
End
10.0.0.254
End
10.0.0.254
192.6.11.254
Show current DHCP server pools.
Intf State
eth0 USED
Intf State
eth0 USED
eth0 USED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0