Show Radius Server Group - Cisco Sx350 Cli Manual

49
991
Example
The following example displays radius server global configuration:
switchxxxxxx# show radius server configuration
Radius Server Status: Enabled
Authentication UDP port: 1812 (default)
Accounting UDP port: 1813 (default)
Authentication failure traps are enabled
Authentication success traps are enabled
Accounting traps are enabled

49.17 show radius server group

To display a Radius Server group configuration, use the show radius server group
command in Privileged EXEC mode.
Syntax
show radius server group [
Parameters
•
group-name
—Specifies a name of the group. (Length: 1–32 characters)
Command Mode
Privileged EXEC mode
User Guidelines
Use the show radius server group
Use the show radius server group command, to display all groups.
Example
The following example displays radius server groups.
switchxxxxxx#
show radius server group
group-name
]
group-name
command, to display one group.
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Radius Server Commands