Showing The Mac Addresses Of All Service Instances On A Specific Bridge Domain - Cisco NCS 4200 Series Configuration Manual

Showing the MAC Addresses of All Service Instances on a Specific Bridge Domain

Command or Action
Step 2
show ethernet service instance id id interface type
number mac security address
Example:
Device# show ethernet service instance id 200
interface GigabitEthernet 1/0 mac security address
Step 3
end
Example:
Device# end
Showing the MAC Addresses of All Service Instances on a Specific Bridge
Domain
SUMMARY STEPS
1. enable
2. show bridge-domain id
3. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show bridge-domain id
Example:
Device# show bridge-domain 100 mac security
address
Step 3 end
Example:
Device# end
Layer 2 Configuration Guide for Cisco NCS 4200 Series
62
Configuring MAC Address Security on Service Instances and EVC Port Channels
mac security address
Purpose
Enables privileged EXEC mode.
mac security address Displays the secured addresses of all the service instances
on a specified bridge domain.
Returns to user EXEC mode.
Purpose
Displays the addresses of a specific service
instance.
Returns to user EXEC mode.
• Enter your password if prompted.