QFX5100 Switch Hardware Guide
56
Figure 35: Management Port LEDs on a QFX5100 Switch
1—
Status LEDs
2—
em1–SFP management Ethernet port (C1)
Cage (socket for either 10/100/1000 Base-T
RJ45 SFP or 1GbE fiber SFP)
3—
Reset
button, see caution statement below
CAUTION:
Do not use the
under the direction of Juniper Networks Technical Assistance Center (JTAC).
Table 14 on page 57
describes the management port LEDs.
4—
em0–RJ-45 (10/100/1000 Base-T)
management Ethernet port (C0)
5—
RJ-45 console port (CON)
6—
USB port
button to restart the power sequence unless
Reset
Copyright © 2016, Juniper Networks, Inc.