Qfx5100 - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Table 42: SFP+ Active Direct Attach Copper Cable Specifications (continued)
Product Number
QFX-SFP-DAC-10MA
Related
Documentation
Interface Specifications for SFP+ and QSFP+ Active Optical Cables for the QFX5100
132
Specifications
Rate
Connector type
Supply voltage
Power consumption (per end)
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Length
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the QFX Series on
page 94
Interface Specifications for QSFP+ DAC Breakout Cables for the QFX Series on page 135
Interface Specifications for QSFP+ DAC Cables for the QFX Series on page 140
Installing a Transceiver in a QFX Series Device on page 214
Removing a Transceiver from a QFX Series Device on page 213
An active optical cable (AOC) is a fiber assembly that has the transceivers permanently
attached. Juniper Networks provides AOC solutions for both10-GbE and 40-GbE.
Use the
Hardware Compatibility Tool
for 10-GbE AOC and Table 36 on page 93
10-Gbps full-duplex serial transmission
None. SFPs are permanently attached.
3.3 V
0.627 W
°
–40 C to 85
Twinax
28 AWG
2 in. (5 cm)
100 ohms
2% maximum
10 m (32.8 ft)
and Table 43 on page 133 to locate the specifications
for 40-GbE AOC.
Copyright © 2016, Juniper Networks, Inc.
°
C