Figure 16: Qfx5100-48S Switch Port Panel - Juniper QFX5100 Hardware Manual

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
BEST PRACTICE:
QFX5100 and the EX4300, use QFX5100-24Q as spine devices. In the
maximum configuration of 20 total devices, up to four QFX5100-24Q devices
may be used as spine devices. All members can be connected to the spine
using QSFP+ ports. You can configure the QFX5100-96S as a spine in an all
QFX5100-96S VCF or in a mixed VCF comprised of EX4300 and
QFX5100-96S.
Figure 16 on page 29 shows the port panel of a QFX5100-48S switch.

Figure 16: QFX5100-48S Switch Port Panel

1— Electrostatic Discharge (ESD) terminal
2—10 G ports (48)
The QFX5100-48S device ports, (
SFP transceivers that can run at either 100 Mbps or 1 Gbps speed
SFP+ transceivers
SFP to SFP direct attach copper (DAC) cables
SFP+ to SFP+ DAC cables
SFP+ to SFP+ active optical cables (AOC)
The QFX5100-48S 40 G uplink or data ports (
QSFP+ transceivers
SFP+ transceivers
QSFP+ to QSFP+ direct attach copper (DAC) cables
QSFP+ to SFP+ DAC breakout cables (DACBO)
QSFP+ to QSFP+ active optical cables (AOC)
QSFP+ to SFP+ AOC breakout cables (AOCBO)
Field-Replaceable Units in a QFX5100 Device on page 12
Port Panel of a QFX5100-24Q Device on page 23
Port Panel of a QFX5100-96S Device on page 32
Access Port and Uplink Port LEDs on a QFX5100 Device on page 57
Installing and Removing QFX5100 Device Hardware Components on page 201
Chapter 2: Chassis Components and Descriptions
In a mixed VCF environment with multiple models of
3— 40 GbE ports (6)
through ) support:
0 47
through
48
) support:
53
29