Management Port Leds In Ex2200 Switches; Figure 12: Leds On The Management Port On An Ex2200 Switch Except The Ex2200-C Switch Model; Figure 13: Leds On The Management Port On An Ex2200-C Switch; Table 7: Link/Activity Led On The Management Port On Ex2200 Switches - Juniper EX2200 Series Hardware Manual

Related
Documentation

Management Port LEDs in EX2200 Switches

Table 7: Link/Activity LED on the Management Port on EX2200 Switches

LED
Link/Activity
Copyright © 2011, Juniper Networks, Inc.
EX2200 Switches Hardware Overview on page 3
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
The management port on an EX2200 switch has two LEDs that indicate link/activity and
port status. The EX2200 switches except the EX2200-C switch models have the
management port on the rear panel and the EX2200-C switch has the management port
on the front panel. See Figure 12 on page 17
Figure 12: LEDs on the Management Port on an EX2200 Switch Except
the EX2200-C Switch Model
Link/Activity
LED

Figure 13: LEDs on the Management Port on an EX2200-C Switch

Link/Activity
LED
Status
LED
Table 7 on page 17 describes the Link/Activity LED.
Color
Green
Table 8 on page 18 describes the Status LED.
and Figure 13 on page
Status
LED
State and Description
Blinking—The port and the link are active, and there is link
activity.
On steadily—The port and the link are active, but there is no
link activity.
Off—The port is not active.
Chapter 2: Component Descriptions
17.
17