Table 34: Supported Dac And Dac Breakout Cables For The Qfx5100 - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Table 33: Supported Optical Transceivers for the QFX5100 Switch (continued)
Part Number
JNP-QSFP-40G-LR4
JNP-QSFP-40G-LX4
Also available in packs of
4 transceivers,
JNP-40G-LX4-4PACK.
QFX-QSFP-40G-SR4
EX-SFP-10GE-ZR
NOTE: Not available for
the QFX5100-48T

Table 34: Supported DAC and DAC Breakout Cables for the QFX5100

Part Number
QFX-SFP-DAC-1M
NOTE: Not available for the
QFX5100-48T
QFX-SFP-DAC-2M
NOTE: Not available for the
QFX5100-48T
90
Description
QSFP+ module 40GBASE-LR4, 40-Gigabit
Ethernet pluggable
Juniper Networks proprietary 40G-LX4, QSFP+
module 40-Gigabit Ethernet pluggable
QSFP+ module 40GBASE-SR4, 40-Gigabit
Ethernet
Juniper Networks proprietary SFP+ module
10GBASE-ZR, 10-Gigabit Ethernet
Table 34 on page 90 describes the supported DAC and DAC breakout cables. For an
online version of the specifications, see the
to use a third-party cable, it should meet the specifications described in
Specifications for SFP+ DAC Cables for the QFX Series" on page
Specifications for QSFP+ DAC Breakout Cables for the QFX Series" on page
"Interface Specifications for QSFP+ DAC Cables for the QFX Series" on page
CAUTION: If you face a problem running a Juniper Networks device that uses
a third-party optic or cable, the Juniper Networks Technical Assistance Center
(JTAC) can help you diagnose the source of the problem. Your JTAC engineer
might recommend that you check the third-party optic or cable and potentially
replace it with an equivalent Juniper Networks optic or cable that is qualified
for the device.
Description
SFP+ 10-Gigabit Ethernet DAC cable assembly,
30 AWG
SFP+ 10-Gigabit Ethernet DAC cable assembly,
30 AWG
Maximum Distance Supported
10 km transmission on SMF cable
2 km transmission on SMF cable
100 m transmission on OM3, MMF cable
150 m transmission on OM4, MMF cable
100 m transmission on OM3, MMF cable
150 m transmission on OM4, MMF cable
80 km transmission on SMF cable
Hardware Compatibility Tool
126, "Interface
Active/Passive
Passive
Passive
Copyright © 2016, Juniper Networks, Inc.
. If you choose
"Interface
135, and
140.
Length
1 m (3.3 ft.)
2 m (6.6 ft.)