Table 54: Cable Specifications For Console And Management Connections For - Juniper QFX5100 Hardware Manual

Table 53: QSFP+ MPO Fiber-Optic Crossover Cable Pinouts (continued)
Pin
12
Related
Documentation
Cable Specifications for Console and Management Connections for the QFX Series
Table 54: Cable Specifications for Console and Management Connections for the QFX Series
Port on QFX Series
Device Cable Specification
Console port RS-232 (EIA-232) serial cable
Management port Category 5 cable or
equivalent suitable for
1000BASE-T operation
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Interface Support for the QFX3500 Device
Interface Support for the QFX3600 Device
Interface Support for the QFX5100 Device on page 86
QFX5200 Optical Interface Support
Interface Support for the QFX10002
QFX10000 Optical Transceiver and Cable Support
Table 54 on page 149 lists the specifications for the cables that connect the QFX Series
to a management device.
NOTE: The QFX Series can be configured with SFP management ports that
support 1000BASE-SX transceivers. See
SFP+, and QSFP+ Transceivers for the QFX Series" on page 94
the fiber-optic cables required for use with these transceivers.
Cable Supplied
One 7-foot (2.13-meter) long
RJ-45 patch cable and RJ-45 to
DB-9 adapter
One 7-foot (2.13-meter) long
RJ-45 patch cable
Console Port Connector Pinouts for the QFX Series on page 84
Management Port Connector Pinouts for the QFX Series on page 85
Connecting a QFX Series Device to a Management Console on page 179
Connecting a QFX3600 Device to a Network for Out-of-Band Management
Connecting a QFX3500 Device to a Network for Out-of-Band Management
Connecting a QFX3100 Director Device to a Network for Out-of-Band Management
Connecting a QFX5100 Device to a Network for Out-of-Band Management on page 180
Pin
1
"Interface Specifications for SFP,
Maximum Length
7 feet (2.13 meters)
328 feet
(100 meters)
Chapter 9: Cable Specifications
for more on
Device
Receptacle
RJ-45
RJ-45
149