Figure 12: Management Panel Components On The Qfx5100-96S; Chassis Components And Descriptions - Juniper QFX5100 Hardware Manual

Copyright © 2016, Juniper Networks, Inc.

Figure 12: Management Panel Components on the QFX5100-96S

1— Status LEDs
2— em1–SFP management Ethernet port (C1)
Cage (socket for either 1 GbE copper SFP or
fiber SFP)
3— Reset
button, see caution statement above
The management panel consists of the following components:
Status LEDs
ALM–Alarm
Unlit indicates the switch is halted or that there is no alarm.
Red indicates a hardware fault, such as a power failure or a system shutdown due
to system over-heating.
Amber indicates a major or minor alarm.
SYS–System
Unlit indicates the switch is powered off or halted.
Solid green indicates that Junos OS for QFX Series is loaded on the switch.
Blinking green indicates the switch is:
A participating member in a Virtual Chassis.
A participating leaf device in a Virtual Chassis Fabric (VCF).
A participating spine device in a VCF.
A Routing Engine Master in a VCF.
A Routing Engine Backup in a VCF.
Chapter 2: Chassis Components and Descriptions
4— em0–RJ-45 (1000 Base-T) management
Ethernet port (C0)
5— RJ-45 console port (C0N) )
6— USB port
21