Juniper QFX5100 Hardware Manual page 116

QFX5100 Switch Hardware Guide
Table 37: Copper Interface Support and Optical Interface Support for Gigabit Ethernet SFP
Transceivers for the QFX Series (continued)
Standards
Compliance Specifications
1000BASE-SX Product SKU
number
Supported models
Signaling rate
Connector type
Fiber pairs
Transmit and
receive wavelength
(range)
Average transmit
launch power
(minimum)
Average transmit
launch power
(maximum)
Receive sensitivity
Average receiver
power (maximum)
DOM support
Fiber type
Core/cladding size
Fiber grade
Modal bandwidth
at 850 nm
(minimum
overfilled launch)
96
QFX-SFP-1GE-SX
QFX3500
QFX5100-24Q (management ports only)
QFX5100-48S
QFX5100-48T (management port only)
QFX5100-96S
1.25 GBd +/- 100 ppm
Lucent connector (LC)/physical contact (PC)
1
770 nm to 860 nm
-9.5 dBm
-3 dBm
-17 dBm
0 dBm
Available
Multimode fiber (MMF)
62.5/125 µm 62.5/125 µm
FDDI OM1
160 MHz x km 200 MHz x km
50/125 µm 50/125 µm
– OM2
400 MHz x km 500 MHz x km
Copyright © 2016, Juniper Networks, Inc.