Ac Power Cord Specifications For A Qfx Series Device - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Table 28: AC Power Specifications for a QFX5100 Device (continued)
Item
Maximum power consumption
QFX5100-24Q
QFX5100-48S
QFX5100-48T
QFX5100-96S
Related
Documentation

AC Power Cord Specifications for a QFX Series Device

80
AC Power Cord Specifications for a QFX Series Device on page 80
AC Power Supply for a QFX5100 Device on page 47
General Safety Guidelines and Warnings on page 239
General Electrical Safety Guidelines and Warnings on page 261
Detachable AC power cords are shipped with the chassis, if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5 meters) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the QFX
Series switches are in compliance.
Table 29 on page 81 lists AC power cord specifications provided for each country or
region.
Specification
365 W
365 W
395 W
470 W
Copyright © 2016, Juniper Networks, Inc.