Qfx-Pfa-4Q; Figure 21: Qfx-Pfa-4Q Faceplate And Leds; Table 9: Qfx-Pfa-4Q Status And Fpga Leds - Juniper QFX5100 Hardware Manual

QFX-PFA-4Q

Table 9: QFX-PFA-4Q Status and FPGA LEDs

LED State
ST Unlit
Green
FPGA
Off
LD
Amber
Green
AL Off
Amber
Red
Copyright © 2016, Juniper Networks, Inc.
The QFX-PFA-4Q, which features a high-performance field-programmable gate array
(FPGA), provides four additional QSFP+ ports to the QFX5100-24Q switch. The
QFX-PFA-4Q is a double-wide expansion module.
and LEDs on the expansion module.

Figure 21: QFX-PFA-4Q Faceplate and LEDs

1— Expansion module status LED
2— QSFP+ ports and LEDs
3— FPGA LEDs
Table 9 on page 37 describes the status and FPGA LEDs on the QFX-PFA-4Q.
Description
The expansion module is offline.
The chassis is powered off.
The expansion module is online and functioning normally.
FPGA not configured.
FPGA configuration in progress or failed.
FPGA configured successfully.
No FPGA alarms.
Minor FPGA alarm.
Major FPGA alarm.
Chapter 2: Chassis Components and Descriptions
Figure 21 on page 37 shows the ports
4— 1-PPS and 10-MHz GPS input and output
5— RJ-45 Ethernet port
6— Time-of-day (TOD) RS-232 port
37