Definitions Of Safety Warning Levels - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Related
Documentation

Definitions of Safety Warning Levels

240
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Operate the device only when it is properly grounded.
Ensure that the separate protective earthing terminal provided on this device is
permanently connected to earth.
Replace fuses only with fuses of the same type and rating.
Do not open or remove chassis covers or sheet-metal parts unless instructions are
provided in the hardware documentation for this device. Such an action could cause
severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Avoid spilling liquid onto the chassis or onto any device component. Such an action
could cause electrical shock or damage the device.
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Always ensure that all modules, power supplies, and cover panels are fully inserted
and that the installation screws are fully tightened.
AC Power Electrical Safety Guidelines on page 264
DC Power Electrical Safety Guidelines for Switches on page 266
General Electrical Safety Guidelines and Warnings on page 261
Maintenance and Operational Safety Guidelines and Warnings on page 256
Installation Instructions Warning on page 248
Grounded Equipment Warning on page 255
The documentation uses the following levels of safety warnings (there are two Warning
formats):
NOTE: You might find this information helpful in a particular situation, or you
might overlook this important information if it was not highlighted in a Note.
CAUTION: You need to observe the specified guidelines to prevent minor
injury or discomfort to you or severe damage to the device.
Copyright © 2016, Juniper Networks, Inc.