Juniper QFX5100 Hardware Manual page 165

Table 51: Interface Specifications for Active Copper QSFP+ DAC Cables (continued)
Product Number Specifications
JNP-QSFP-DAC-10MA Rate
Connector type
Supply voltage
Power consumption
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Time delay
Length
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the QFX Series on
page 94
Interface Specifications for SFP+ DAC Cables for the QFX Series on page 126
Interface Specifications for QSFP+ DAC Breakout Cables for the QFX Series on page 135
Installing a Transceiver in a QFX Series Device on page 214
Removing a Transceiver from a QFX Series Device on page 213
Chapter 8: Port and Interface Specifications
40-Gbps full-duplex serial transmission
None. SFPs are permanently attached.
3.3 V
0.058 W
° °
–40 C to 85 C
Twinax
28 AWG
0.3 in. (0.762 cm)
100 ohms
2 % maximum
4.3 nsec/m
10 m (32.8 ft)
145