Juniper QFX5100 Hardware Manual page 298

QFX5100 Switch Hardware Guide
United States
Nonregulatory Environmental Standards
278
The QFX Series device has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
These QFX Series product SKUs are designed to be Network Equipment Building System
(NEBS) compliant:
QFX3008-I
QFX3600-I
QFX3600
QFX3500
QFX5100
QFX5110
QFX5200
QFX10002
QFX10008
QFX10016
Those device product SKUs are designed to meet the following NEBS compliance
standards:
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-1089-CORE, Issue 6: EMC and Electrical Safety—Generic Criteria for Network
Telecommunications Equipment
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an Isolated DC return (DC-I), as
defined in GR-1089-CORE.
GR-63-CORE: NEBS, Physical Protection
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in a central office (CO).
Copyright © 2016, Juniper Networks, Inc.