Juniper QFX5100 Hardware Manual page 198

QFX5100 Switch Hardware Guide
Related
Documentation
178
NOTE: The switch powers on as soon as power is provided to the power
supply. There is no power switch on the device.
Verify that the and
10. IN OUT
CAUTION: A system reboot with Routing Engine FPGA version 7.1 might
not successfully boot the Junos OS software. In case of a system reboot
failure, you need to power cycle the switch. To check the current FPGA
version, issue the
DC Power Supply in a QFX5100 Device on page 49
DC Power Supply LEDs on a QFX5100 Device on page 62
LEDs on the power supply are lit green and are on steadily.
command.
show chassis firmware
Copyright © 2016, Juniper Networks, Inc.