Management Port Leds On Ex4300 Switches; Figure 20: Leds On The Management Port On A 24-Port Ex4300 Switch; Table 18: Link/Activity Led On The Management Port On An Ex4300 Switch; Table 19: Status Led On The Management Port On An Ex4300 Switch - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide

Management Port LEDs on EX4300 Switches

Table 18: Link/Activity LED on the Management Port on an EX4300 Switch

LED Color
Link/Activity Green

Table 19: Status LED on the Management Port on an EX4300 Switch

LED Color
Status Green
Related
Documentation
38
EX4300 Switches Hardware Overview on page 3
The management port, labeled
LEDs that indicate link activity and status of the management port.
shows the location of Management port on a 24-port EX4300 switch.

Figure 20: LEDs on the Management Port on a 24-port EX4300 Switch

1— Link/Activity LED
Table 18 on page 38 describes the Link/Activity LED.
State and Description
Blinking—The port and the link are active, and there is link activity.
On steadily—The port and the link are active, but there is no link activity.
Off—The port is not active.
Table 19 on page 38 describes the Status LED.
State and Description
Indicates the speed. The speed indicators are:
Off—Link speed is 10 Mbps.
Blinking—Link speed is 100 Mbps.
On Steadily—Link speed is 1000 Mbps.
Connecting a Device to a Network for Out-of-Band Management on page 193
EX4300 Switches Hardware Overview on page 3
MGMT , on the rear panel of an EX4300 switch, has two
2— Status LED
Copyright © 2017, Juniper Networks, Inc.
Figure 20 on page 38