Juniper QFX5100 Hardware Manual page 159

Table 48: QSFP+ Active DAC Breakout Cable Specifications (continued)
Product SKU
JNP-QSFP-DACBO-7MA
JNP-QSFP-DACBO-10MA
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Specifications
Rate
Connector type
Supply voltage
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Time delay
Length
Rate
Connector type
Supply voltage
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Length
Minimum Junos OS release
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the QFX Series on
page 94
Interface Specifications for SFP+ DAC Cables for the QFX Series on page 126
Interface Specifications for QSFP+ DAC Cables for the QFX Series on page 140
Installing a Transceiver in a QFX Series Device on page 214
Chapter 8: Port and Interface Specifications
40-Gbps full-duplex serial transmission
None. SFPs are permanently attached.
3.3 V
° °
–40 C to 85 C
Twinax
30 AWG
0.3 in. (0.762 cm)
100 ohms
4.5 nsec/m
7 m (22.9 ft)
40-Gbps full-duplex serial transmission
None. SFPs are permanently attached.
3.3 V
° °
–40 C to 85 C
Twinax
28 AWG
1 in. (2.54 cm)
100 ohms
10 m (32.8 ft)
14.1X53-D35
139