Juniper QFX5100 Hardware Manual page 36

QFX5100 Switch Hardware Guide
Table 5: Supported QFX and EX Series Switches Configurations (continued)
Platform Element Standalone
Initial software 14.1X53-D26
release
QFX5100-48S
Initial software 13.2X51-D10
release
Topology
Number of 1
members or nodes
Number of
QFX5100 spine
devices
QFX5100-48T
Initial software 13.2X51-D25
release
Topology
Number of 1
members or nodes
Number of
QFX5100 spine
devices
QFX5100-96S
Initial software 13.2X51-D20
release
Topology
Number of 1
members or nodes
16
QFX3000-G QFX3000–M
13.2X52-D10 13.2X52-D10
clos clos
128 16
14.1X53-D15 14.1X53-D15
clos clos
128 16
QFX Virtual Virtual Chassis
Chassis Fabric
13.2X51-D20 13.2X51-D20
ring spine and leaf
10 20 spine or leaf
NOTE: Use as a
spine with
EX4300. Use as
leaf with
QFX5100-24Q.
Min: 2 out of 20
Max: 4 out of 20
13.2X51-D25 13.2X51-D25
ring spine and leaf
10 20 leaf mode only
Min: 2 out of 20
Max: 4 out of 20
13.2X51-D20 13.2X51-D25
ring spine and leaf
Increased from 20 spine or leaf
4 members to
NOTE: Use as a
10 in
spine with
13.2X51-D25
EX4300. Use as a
leaf with
QFX5100-24Q.
Copyright © 2016, Juniper Networks, Inc.
Junos Fusion
14.1X53-D16
spine and leaf
64 satellite
devices
14.1X53-D16
spine and leaf
64 satellite
devices
14.1X53-D16
spine and leaf
64 satellite
devices