Management Port Leds On A Qfx5100 Device; Viewing System Information - Juniper QFX5100 Hardware Manual

Table 13: Chassis Status LEDs on a QFX5100 Switch (continued)
Name
MST–Master in a QFX Virtual
Chassis or Routing Engine
Master in a VCF
ID–Identification
Related
Documentation

Management Port LEDs on a QFX5100 Device

Copyright © 2016, Juniper Networks, Inc.
Color
Unlit
Green
Green
Unlit
Blue
Management Panel of a QFX5100 Device on page 19
show chassis alarms
request chassis beacon
The management ports (labeled
Base-T and SFP 1000 Base-X connections) on a QFX5100 switch have two LEDs that
indicate link status and link activity (see
status; the right LED indicates link/activity.
State Description
Off The switch is a linecard member in a QFX
Virtual Chassis.
On steadily The switch is one of the following:
A standalone switch
In the master role in a QFX Virtual
Chassis
Is the routing engine master in a VCF
Blinking The switch is the backup master in a QFX
Virtual Chassis or the backup routing
engine in a VCF.
Off The beacon feature is not enabled on the
switch. This feature is enabled using the
request chassis beacon
Blinking The beacon feature is enabled on the
switch. This feature is enabled using the
request chassis beacon
for 10/100/1000 Base-T and
C0
Figure 35 on page
Chapter 5: Viewing System Information
command.
command.
for 10/100/1000
C1
56). The left LED indicates
55