The Qfx5100 - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide
Table 44: QSFP+ to QSFP+ Active Optical Cables (continued)
Characteristic
Operating range
Diagnostic support
Minimum Junos OS release
Related
Documentation
Interface Specifications for QSFP+ to SFP+ Active Optical Breakout Cables for the
QFX5100
134
Value
JNP-40G-AOC-1M
JNP-40G-AOC-3M
JNP-40G-AOC-5M
JNP-40G-AOC-7M
JNP-40G-AOC-10M
JNP-40G-AOC-15M
JNP-40G-AOC-20M
JNP-40G-AOC-30M
Laser bias current–supported
RX input power–supported
Case temperature–supported
Power supply voltage–supported
Laser output power–not supported
14.1X53-D35
Interface Support for the QFX5100 Device on page 86
A 40-Gigabit Ethernet active optical breakout cable (AOCBO) is a four-fiber assembly
that has an QSFP+ transceiver permanently attached to one end and has four SFP+
transceivers attached to the individual fibers at the other end.
Use Table 45 on page 135
1 m (3.3 ft.)
3 m (9.8 ft.)
5 m (16.4 ft.)
7 m (22.9 ft.)
10 m (32.8 ft.)
15 m (49.2 ft.)
20 m (65.6 ft.)
30 m (98.4 ft.)
to locate the specifications for 40-Gigabit Ethernet AOCBO.
Copyright © 2016, Juniper Networks, Inc.